WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com All part numbers in BLUE are new for the OldBook. SECTION 11 748 See FATBOOK For Late Model Applications GENESIS 8.5” AUXILLIARY LED PLASMA RODS •Single row of dual-intensity LEDs •Designed to vertically side-mount between the rear fender and saddlebags •Red or smoke faceted lens •Quick disconnects allow plug-and-play installation on models with optional wire adapter PART #2050-0421 (see page 761; sold separately) •Disconnects can be removed for custom 3-wire installation •Dimensions: 8.5” L x 0.4” W x 0.4” H •46” 26 AWG wire •Sold in pairs DUAL INTENSITY SIDE FIRING AUXILIARY LED STRIPS •Flexible, low-profile auxiliary LED strips designed to mount under the rear fender edge •72 dual-intensity red LEDs per strip are placed at a 90° angle to shine towards the rear •Each strip is 23.5” long with 5’ wire leads to route under the seat for connections for low intensity power (run), high intensity power (brake, turn signal or brake/turn) and ground •LED strips can be cut every 6 LEDs or 1.95” to customize length for an exact fit to the rear fender •0.310” mounting surface; 0.094” thick •Current draw at 12.8V per 6 LEDs: 14mA run, 38mA brake RED PLASMA RODS™ •Great solution for adding rear lights to baggers •Diffuser provides even light disbursement and a smoked finish when the light is off •Designed to be used as running, turn and/or brake lights •Dual converters allow for Red Plasma Rods™ to be used as run/brake lights (sold separately) PART # DESCRIPTION 2040-3243 Red PART # DESCRIPTION 2040-3244 Smoked PART # DESCRIPTION 2040-3022 Dual intensity side firing auxiliary LED strips PART # DESCRIPTION PLASMA RODS 2040-0817 8” (ea.) 2040-0818 8” (pr.) 2040-1551 10” (pr.) 2040-1010 12” (pr.) PART # DESCRIPTION PLASMA RODS (CONT) 2040-1011 14” (pr.) PLASMA ROD DUAL CONVERTERS 2040-1309 8” (ea.) 2040-1310 10”-14” (ea.) •Two-wire applications can be converted to three-wire with the dual converters (sold separately) •Pre-taped with 3M™ automotive-grade tape for mounting and includes Posi-Taps® for a quick, clean installation •Hard-wired, universal fitment •Current draw at 14.4V per 6 LEDs: 16mA run, 48mA brake •Universal design, 3-wire installation •Sold in pairs; pre-taped for mounting 2040-0817 2040-0818 2040-1309 2040-3243 2040-3244
RkJQdWJsaXNoZXIy OTcxOTk3