2026-2027 Drag Specialties OldBook

OldBook 2026-2027 TM EVOLUTION BIG TWIN • SHOVELHEAD • PANHEAD KNUCKLEHEAD • FLATHEAD • IRONHEAD XL

A classic model Harley Davidson FXR found in a small South Dakota town was the starting point for the 2026-27 Drag Specialties OldBook cover bike. But the builder of this stunning FXR custom, Jason Mook, owner of Deadwood Custom Cycles in Deadwood, South Dakota, did not start this project with the intention of building a cover bike. He bought the bike for himself. “I love FXRs,” Mook said.“I think they are the greatest bike model that Harley Davidson has built. Just my opinion, you can argue it with me, but that’s what I think.” “I have eight of them, each one a bit different” Mook said with a laugh.“I’m always on the lookout for FXRs.” Mook found the bike for sale in the town of Nemo, South Dakota.“One of the shop guys was in contact with the seller about buying a car, and he mentioned that the seller also had an FXR,” Mook said.“It was available at a great price, so I went down to look at it, did a short test ride.” It was rough but running, so he purchased it and took it back to the shop. “I put it up on the bench,” Mook said. It had performed OK during his brief test ride, but once he started to tear it down, he found some things that needed to be repaired or replaced to make the bike a solid runner.“A few things I found, I kind of was surprised my little test ride had gone OK,” he laughed. The entire bike was stripped down, and the frame and engine cases were sent out for powder coating.Then Mook turned to the Drag Specialties OldBook to start sourcing parts for the rebuild – not because this build was going to be the next OldBook cover bike.The OldBook is his usual go-to resource for parts for these kinds of builds. “This started out as a build just for me,” Mook said.“And there are so many great parts in the OldBook for FXRs. Drag has been offering parts for FXRs almost since the day the model came out in 1982.And I like to keep things ‘pure,’ in a sense,” he said.“I don’t put M-Eight motors in FXR frames, for example. We CAN do stuff like that, but I like to keep the FXR in its purest form. I still love carburetors!” The engine/transmission setup got ‘all the goodies’, Mook said. Parts from S&S Cycle and Feuling were ordered to ensure strong, reliable engine performance. Mook went with an Andrews kit for a rebuild of the 5-speed transmission. “The FXR late 1989 to 1990 is the first 5-speed transmissions that had a splined main shaft.They are not without a few known issues,” Mook said.“I wanted to make sure it was set up right.” As the parts started arriving, the bike was up on the bench partially assembled, when a visit from Drag Specialties’Tom Builder/Owner: Jason Mook Deadwood Custom Cycles Paint: Eric Malotke Open Throttle Customs ON THE COVER Pictured: Jason Mook and the team from Deadwood Custom Cycles

dragspecialties.com | #SINCE1968 Motzko sparked the idea of using the in-progress build as the catalog cover bike. “Tom is an occasional visitor to the shop,” Mook said. “He came in, and there was some discussion about what we had available that might work for a cover bike build. I had a couple potentials, but the whole time we were talking, the FXR project was sitting up there on the lift. It kept catching our attention, like it was saying ‘Pick me! Pick me!’And that’s what we did!” The final parts list expanded to include Saddlemen FXR mini fairing, a RWD rear fender and Klock Werks front fender.“Those pieces gave the painter a great blank canvas to work with,” Mook said. “I already had the frame, cases and some other parts powder coated black, and also had some silver in the bike already,” Mook said.“But I started to think about the final look for a cover bike, it needs to have that classic Drag Specialties blue in it. I’m not a ‘blue bike’ kind of guy, but for this build, I really wanted to have blue be a featured color.” Mook gave his ideas for the final look to the painter, Eric Malotke at Open Throttle Customs, with the suggestion to “Just go for it! I asked for multiple shades of blue, to go super-blue, in a sense,” he said. “And he got it just perfect.” The blue paint is accented with a lot of Arlen Ness anodized blue accessories.“Those guys are just the kings of custom,” Mook said.“They keep coming out with these amazing parts and finishes. I went with their footpegs, grips, mirrors, levers, the fork brace, all anodized in blue.” The bike’s seat is a Drag Specialties Predator III with double-diamond stitching with blue thread. The exhaust system is from Trask, in Mook’s preferred finish of choice - stainless steel.“I love the look of stainless steel for the exhaust,” he said.“It is low maintenance, and it looks racy. “I really want to emphasize what an honor it is to have a bike on the cover,” Mook said.“And this build is a true team effort – every single member of the team at some point had their hands on this bike.And this build really is a true catalog build. I think there are only three parts in the entire build that are not from the OldBook – this bike is a great representation of what you can do with one of the most iconic Harley Davidson models and the parts in the OldBook and FatBook.”

16. DASHES & GAUGES.. . . . . . . . . . . . . . . . . 1018-1048 17. FRAMES & SUSPENSION. . . . . . . . . . . . . . 1049-1106 18. FENDERS & LICENSE PLATEFRAMES...................... 1107-1140 19. FOOTRESTS & FLOORBOARDS. . . . . . . . . . . 1141-1192 20. WHEELS & AXLES.. . . . . . . . . . . . . . . . . . 1193-1206 21. HARDWARE, COVERS & GENERAL.. . . . . . . 1207-1252 OEM CROSS REFERENCE.. . . . . . . . . . . . . . . . 1253-1271 VINGUIDE........................... 1272-1275 DRAG SPECIALTIES QUICK REFERENCE CHART. . 1276-1277 INDEX.............................. 1278-1314 1. WINDSHIELDS & FAIRINGS.. . . . . . . . . . . . . . . . . 8-54 2. AUDIO, COMMUNICATION & MOUNTS. . . . . . . . 55-110 3. SADDLEBAGS & LUGGAGE.. . . . . . . . . . . . . . 111-185 4. SEATS & SISSY BARS. . . . . . . . . . . . . . . . . . 186-276 5.EXHAUST........................... 277-336 6. FUEL/AIR SYSTEMS.. . . . . . . . . . . . . . . . . . . 337-379 7.ENGINE............................ 380-465 8. TRANSMISSION & DRIVELINE.. . . . . . . . . . . . 466-554 9.GASKETS&SEALS.................... 555-584 10.ELECTRICAL......................... 585-673 11.LIGHTING........................... 674-772 12. HANDLEBARS, CONTROLS & MIRRORS. . . . . . 773-888 13.CABLES............................ 889-921 14.BRAKES............................ 922-975 15. TANKS & OIL FILTERS. . . . . . . . . . . . . . . . . 976-1017 Please Note: All Evolution Sportsters are in the 2026 FatBook™. All Evolution Big Twins are in THIS catalog. OldBook 20264-20275 TM

5 IMPORTANT INFORMATION: EMISSIONS REGULATIONS NOTE: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emissions-related part(s) that alter the performance of OEM emissions-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information. More California exhaust information is available at www.arb.ca.gov/. NOTE: Parts designated as “Race Only” are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of “Race Only” parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S. EPA under the federal Clean Air Act. “RACE ONLY” PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. NOTE: Aftermarket products, including but not limited to exhausts, catalytic converters, oxygen sensors, fuel/a ir controller modules, air filter kits, camshafts, O2 eliminators, and carburetors and jet kits which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for sale or street use in California unless they have been issued a CARB Executive Order. Aftermarket emissions-related products which have not been issued an Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900(b)(2), are authorized for closed circuit race use only. Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal laws. See manufacturer’s information and state and local laws to determine what is authorized for your use on your vehicle. The following emissions-related defined terms are used in this catalog (PARTS WITH THE FOLLOWING DESIGNATIONS IN THIS CATALOG ARE NOT ILLEGAL FOR SALE IN CALIFORNIA UNDER CARB REGULATIONS): • “CARB E.O.” means the specified Executive Order issued by CARB. An Executive Order constitutes an exemption by CARB from CA Vehicle Code 27156 and 38391, for sale of the part number for the make/model/year fitment(s) specified in the Executive Order. • “Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part. • “Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised. In addition, for 49-State compliance, the following term applies: • “Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” (Not legal for sale or use in California) means any aftermarket part intended to replace an original equipment emissions-related part and that meets all EPA emission regulations by installing the element of design in all emissions-related respects to the certified configuration of the vehicle, engine, or piece of equipment. This manufacturer has declared in writing that it has fully documented the emissions testing of an appropriate test vehicle, engine, or piece of equipment that had been identically altered and that the part meets all applicable emissions standards for that make/model/year fitment(s) advertised.

6 IMPORTANT INFORMATION: EMISSIONS PRODUCT CATEGORIZATION This catalog implements use of a categorization system developed by SEMA to identify emission products’ classifications and any corresponding restrictions on sales of those products. The products will be identified as fitting one of the following categories, as determined by the vendor/manufacturer. The categorization system is set forth below. The applicable product classification is displayed under the “EMIS” column in the catalog. Category Meaning Sales Restrictions 1 This Product is covered under a CARB EO and is legal for sale and use in all 50 states. See “CARB EO” definition on page 5. No USA Territory Restrictions. 2 This product is covered under a SEMA Certified Emissions certification or has otherwise met the requirements of the EPA’s Tampering Policy and is legal for sale in states that do not mandate an EO. See “Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” definition on page 5. Blocked from sales into California 3 This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-pollution-controlled vehicles only. See “Race Only” Note on page 5. *Products for which vendors did not supply classification information are by default coded as “3.” Blocked from sales in ALL states unless dealer signs acknowledgment of dealer’s obligation to ensure sales or installation of such parts are on “Competition Use” only vehicles and not for highway use. 4 This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. See “Qualified Manufacturer Declared Replacement Part”definition on page 5. No USA Territory Restrictions. N/A Product not subject to emissions control regulations. No USA Territory Restrictions SEMA CATEGORIZATION LABELS

7 IMPORTANT INFORMATION: SALES OF RACE ONLY PARTS The federal Environmental Protection Agency’s policies related to tampering and defeat devices are publicly available at the following sites: https://www.epa.gov/sites/production/files/2020-12/documents/ epatamperingpolicy-enforcementpolicyonvehicleandenginetampering.pdf https://www.epa.gov/sites/production/files/2020-12/documents/ tamperinganddefeatdevices-enfalert.pdf https://www.epa.gov/sites/production/files/2021-01/ documents/caatitleiivehicleenginepenaltypolicy011821.pdf The EPA has taken civil and criminal enforcement action against companies and individuals for violations of the Clean Air Act’s tampering and defeat device prohibitions. By ordering “Race Only” parts from LeMans Corporation, d/b/a Parts Unlimited® and Drag Specialties® (“LeMans”), you, as the selling retailer, expressly acknowledge and assume all the responsibility for ensuring and documenting information to verify that the sale or installation of every “Race Only” part is for competition racing vehicle use only. Examples of such documentation include: • Require that the buyer of the part(s) sign an acknowledgement that the part is for “Race Use Only.” The acknowledgement would contain enough information (i.e., invoice number, purchase date, purchaser name, part number, etc.) to be able to track the part to its ultimate installation. • Evidence that the vehicle is not registered in any State for highway use. • The detailed owner or operator information and vehicle VIN are recorded. • The vehicle is being used in only closed course competition events like King of the Baggers®, BRL Bagger Racing League®, SUPER HOOLIGAN®, AMA FLAT TRACK®, or one of the hundreds of similar competition racing use only events throughout the US (road race, flat track, drag racing and land speed). If you have questions regarding the information that you should collect as evidence that the part purchased from LeMans and sold or installed by you/your company will be used only on a “Race Only” vehicle as intended, please refer to your legal counsel or racing trade association. When ordering Race Only products from LeMans, you will be required to provide a signed Acknowledgement confirming: 1. You are solely responsible to verify and document that use of “Race Only” parts will be limited to competition racing use consistent with the terms of this notice on each individual sales transaction; 2. You will provide LeMans with copies of the documentation that shows evidence of the use of “Race Only” parts purchased from LeMans upon request; and 3. You consent to the disclosure of your identity to any governmental entity responsible for regulating emissions and/or enforcing emissions laws, if requested. NOISE REGULATIONS A number of jurisdictions/states have exhaust noise laws. Exhaust products advertised might not be legal for sale or use on highway vehicles in such jurisdictions/states. Check applicable laws and regulations.

8 Windshields......................... 9-34 Fairings........................... 35-47 FairingTrim........................ 48-50 Brackets And Mounts.. . . . . . . . . . . . . . . . . 50-51 Windscreen Fasteners/Well Nuts.. . . . . . . . . . . . 51 Fairing Pouches/Windshield Bags.. . . . . . . . 52-53 HandlebarBags..................... 53-54 WINDSHIELDS & FAIRINGS

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com All part numbers in BLUE are new for the OldBook. SECTION 1 10 See FATBOOK For Late Model Applications PRO-TOURING FLARE® PART # DESCRIPTION FOR 98 FLTR 2310-0749 12” dark smoke 2310-0748 12” tint PART # DESCRIPTION FOR 98 FLTR (CONT) 2310-0482 14” dark smoke 2310-0481 14” tint SPORT FLARE® PART # DESCRIPTION FOR 98 FLTR 2310-0196 8” black 2310-0214 8” dark smoke 2310-0207 8” tint PART # DESCRIPTION FOR 98 FLTR (CONT) 2310-0358 12” dark smoke 2310-0194 12” tint FLARE® WINDSHIELDS •The Pro Touring Flare® is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town •The Sport Flare™ is more streamlined and offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management •Both styles feature patented design feature “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) •The “flip” at the top of the Flare kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger •Wind tunnel tested and designed for maximum performance and air management •Made of Lexan® polycarbonate with FMR hard coating on both sides of the shield for unmatched durability •All are predrilled for easy mounting using stock windshield hardware •Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. 2310-0749 2310-0748 PART # DESCRIPTION FOR 96-98 FLHT/FLHTC 2310-0226 11.5” clear 2310-0633 11.5” dark smoke 2310-0225 11.5” tint 2310-0715 10.5” clear 2310-0717 10.5” dark smoke PART # DESCRIPTION FOR 96-98 FLHT/FLHTC (CONT) 2310-0716 10.5” tint 2310-0275 8.5” black 2310-0274 8.5” dark smoke 2310-0273 8.5” tint 2310-0213 6.5” black PART # DESCRIPTION FOR 96-98 FLHT/FLHTC (CONT) 2310-0823 6.5” clear 2310-0212 6.5” dark smoke 2310-0211 6.5” tint 2310-0224 3.5” black 2310-0223 3.5” dark smoke PART # DESCRIPTION FOR 96-98 FLHT/FLHTC (CONT) 2310-0222 3.5” tint FOR 86-95 FLHT/FLHTC 2310-0209 6.5” dark smoke 2310-0211 6.5” Tint 2310-0212 6.5” Dark smoke FLARE® WINDSHIELDS (CONT)

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com SECTION 1 All part numbers in BLUE are new for the OldBook. 17 See FATBOOK For Late Model Applications MEMPHIS SLIM •Slimmed-down version of Memphis Fats is 18” wide •Available in clear, solar (a light tint with 72% visible light transmission), “Night Shades” black smoke (a black tint with 40% visible light transmission) and “Night Shades” dark black smoke (a black tint with 25% visible light transmission) •Available in 15” and 17” heights •Fits standard headlight size (5 3/4” to 7”) •Made of Lucite® for excellent optics and durability •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •Mounting kit must be purchased separately; see pages 22-23 •Optional Lowers available for additional windshield coverage; see page 20 •Made in the U.S.A. MEMPHIS FATS WITH BIG HEADLIGHT CUTOUT •Features a 9.5” cutout with a custom shape that is designed for a perfect fit on the large nacelle headlights made by Arlen Ness, Rick Doss and others •Popular American styling available in clear •Made from Lucite® for excellent optics and durability •22” W with three standard heights •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see pages 22-23 •Optional Lowers available for additional windshield coverage, see page 20 •Made in the U.S.A. PART # DESCRIPTION FOR 5 3/4”-7” HEADLIGHT CUTOUTS 15” TALL MEM4110 Clear MEM4119 Solar 17” TALL MEM4210 Clear MEM4219 Solar PART # DESCRIPTION FOR 7” HEADLIGHT CUTOUTS 15” TALL 2311-0112 “Night Shades” clear 2311-0114 “Night Shades” black smoke 2311-0113 “Night Shades” dark black smoke 17” TALL 2311-0115 “Night Shades” clear 2311-0116 “Night Shades” black smoke PART # DESCRIPTION 15” TALL MEM4120 Clear MEM4129 Solar 2313-0317 “Night Shades” clear 2313-0319 “Night Shades” black smoke 2313-0318 “Night Shades” dark black smoke PART # DESCRIPTION 17” TALL MEM4220 Clear MEM4229 Dark black smoke 2313-0320 “Night Shades” clear 2313-0321 “Night Shades” black smoke PART # DESCRIPTION 15” TALL 2313-0049 Clear PART # DESCRIPTION 17” TALL 2313-0054 Clear PART # DESCRIPTION 19” TALL 2313-0059 Clear FOR 9” HEADLIGHT CUTOUTS “Night Shades“ dark black smoke “Night Shades“ black smoke Clear Solar “Night Shades” dark black smoke “Night Shades” clear 2313-0054

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com All part numbers in BLUE are new for the OldBook. SECTION 1 18 See FATBOOK For Late Model Applications MEMPHIS FATS •Features traditional American styling available in clear, solar (a light tint with 72% visible light transmission), “Night Shades” black smoke (a black tint with 40% visible light transmission) and “Night Shades” dark black smoke (a black tint with 25% visible light transmission) •Made from Lucite® for excellent optics and durability •22” W with five standard heights to choose from •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •For standard headlight size (5 3/4” – 7”) •No-Tool detachable Trigger-Lock mounting kits must be purchased separately; see pages 22-23 •Optional Lowers available for additional coverage; see page 20 •Made in the U.S.A. PART # DESCRIPTION FOR 5 3/4” - 7” HEADLIGHT CUTOUTS 13” TALL MEM3110 Clear MEM3119 Solar 15” TALL 2313-0064 Clear 2313-0072 Solar 17” TALL MEM3210 Clear MEM3219 Solar MEM3629 Solar 19” TALL MEM3310 Clear MEM3319 Solar 21” TALL MEM3410 Clear MEM3419 Solar FOR 7” HEADLIGHT CUTOUTS 13” TALL 2311-0100 “Night Shades” clear 2311-0102 “Night Shades” black smoke 2311-0101 “Night Shades” dark black smoke PART # DESCRIPTION FOR 7” HEADLIGHT CUTOUTS (CONT) 15” TALL 2311-0103 “Night Shades” clear 2311-0105 “Night Shades” black smoke 2311-0104 “Night Shades” dark black smoke 17” TALL 2311-0106 “Night Shades” clear 2311-0107 “Night Shades” black smoke 19” TALL 2311-0108 “Night Shades” clear 2311-0109 “Night Shades” black smoke 21” TALL 2311-0110 “Night Shades” clear 2311-0111 “Night Shades” black smoke FOR 9” HEADLIGHT CUTOUTS 13” TALL 2313-0003 Clear 2313-0305 “Night Shades” clear 2313-0307 “Night Shades” black smoke 2313-0306 “Night Shades” dark black smoke 15” TALL 2313-0073 Clear 2313-0081 Solar PART # DESCRIPTION FOR 9” HEADLIGHT CUTOUTS (CONT) 15” TALL (CONT) 2313-0308 “Night Shades” clear 2313-0310 “Night Shades” black smoke 2313-0309 “Night Shades” dark black smoke 17” TALL MEM3620 Clear 2313-0311 “Night Shades” clear 2313-0312 “Night Shades” black smoke 19” TALL MEM3710 Clear MEM3719 Solar 2313-0313 “Night Shades” clear 2313-0314 “Night Shades” black smoke 21” TALL MEM3810 Clear MEM3819 Solar 2313-0315 “Night Shades” clear 2313-0316 “Night Shades” black smoke Dark black smoke Clear Solar “Night Shades” dark black smoke “Night Shades” clear

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com SECTION 1 All part numbers in BLUE are new for the OldBook. 21 See FATBOOK For Late Model Applications PART # DESCRIPTION MEP5319 Solar RIO GRANDE •The most coverage of any windshield in the Sportshield family •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 21” W x 19” H above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 20 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see pages 22-23 •Made in the U.S.A. SPORTSHIELD FAMILY PART # DESCRIPTION 13” TALL 2320-0121 Solar 15” TALL 2320-0123 Solar PART # DESCRIPTION 17” TALL MEP5219 Solar 19” TALL MEP5229 Solar EL PASO •Smooth design complements the lines of your machine •Tapered windshield lower is ideal for handlebar-mounted turn signals •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 20” W; available in 17” or 19” H above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 20 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see pages 22-23 •Made in the U.S.A. PART # COLOR MEP5119 Solar DEL RIO •Good torso protection in a sleek windshield design •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 19” W x 15” H above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 20 •Features No-Tool detachable Trigger-Lock hardware so you can swap or remove your windshield in a flash •Must order mounting kit separately; see pages 22-23 •Made in the U.S.A. PART # COLOR MEP5019 Solar DEL REY •Small, sleek design that offers good protection in a minimalist package •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Measures approximately 15” W x 13” H above headlight •Fits most round headlights •Optional Lowers available for additional windshield coverage; see page 20 •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see pages 22-23 •Made in the U.S.A. PART # DESCRIPTION 2313-0089 Solar SPEED DEMON •Offers more protection with a sporty look •Features a similar shape and style to the popular handlebar mount “Demon” shield, but with the benefits of easier installation and faster removal due to the exclusive Sportshield mounting system •Measures 21” W and 17” H above the headlight; fits a 7” or 9” headlight cutout •Made of Lucite® for excellent optics and durability •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black; see pages 22-23 •Made in the U.S.A. MEP5219

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com SECTION 1 All part numbers in BLUE are new for the OldBook. 23 See FATBOOK For Late Model Applications MEMPHIS FATS AND SLIM DESCRIPTION POLISHED BLACK FATS/SLIM LOWERS HARDWARE For 86-99 FLSTC (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 86-99 FLSTC (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 93-96 FLSTN (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 93-96 FLSTN (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 88-99 FLSTSC/FXSTS (w/ light bar)1, 2 2320-0027 2320-0081 2320-0001 For 88-99 FLSTSC/FXSTS (w/o light bar)1 2320-0027 2320-0081 2320-0001 For 84-99 FXST 2320-0013 2320-0078 MEM9888 For 91-98 FXD, FXDL 2320-0011 2320-0077 MEM9884 For 93-98 FXDWG 2320-0013 2320-0078 MEM9888 For 80-86 FXWG and wide (11 1/2” to 12” wide) forks 2320-0013 2320-0078 MEM9888 For 82-94, 99-00 FXR 2320-0011 2320-0077 MEM9884 For 73-85 FX/FXE/FXS 2320-0011 2320-0077 MEM9884 For 73-85 XL 2320-0011 2320-0077 MEM9884 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. SPORTSHIELDS DESCRIPTION POLISHED BLACK SPORTSHIELD LOWERS HARDWARE For 86-99 FLSTC (w/o Original Equipment light bar) 2320-0020 2320-0071 MEM9891 For 86-99 FLSTC (w/ Original Equipment light bar) 2320-0022 2320-0072 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o Original Equipment light bar) 2320-0020 2320-0071 MEM9891 For 90-99 FLSTF (w/ Original Equipment light bar) 2320-0022 2320-0072 MEM9891 For 93-96 FLSTN (w/o Original Equipment light bar) 2320-0020 2320-0071 MEM9891 For 93-96 FLSTN (w/ Original Equipment light bar) 2320-0022 2320-0072 MEM9891 For 88-99 FLSTSC/FXSTS (w/ light bar)1, 2 2320-0028 2320-0073 2320-0001 For 88-99 FLSTSC/FXSTS (w/o light bar)1 2320-0028 2320-0073 2320-0001 For 84-99 FXST 2320-0014 2320-0070 MEM9888 For 91-98 FXD/FXDL 2320-0012 2320-0069 MEM9884 For 93-98 FXDWG 2320-0014 2320-0070 MEM9888 For 80-86 FXWG and wide (11 1/2” to 12” wide) forks 2320-0014 2320-0070 MEM9888 For 82-94, 99-00 FXR 2320-0012 2320-0069 MEM9884 For 73-85 FX/FXE/FXS 2320-0012 2320-0069 MEM9884 For 73-85 XL 2320-0012 2320-0069 MEM9884 For other narrow forks 8 1/2” to 9” (with 35 mm-42 mm forks) 2320-0012 2320-0069 - For other wide forks 11 1/2” to 12” (with 35 mm-42 mm forks) 2320-0014 2320-0070 - 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS (CONT) SPORTSHIELDS TRIGGER-LOCK MOUNT KITS FATS/SLIM TRIGGER-LOCK MOUNT KITS

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES dragspecialties.com All part numbers in BLUE are new for the OldBook. SECTION 1 24 See FATBOOK For Late Model Applications HANDLEBAR MOUNT WINDSHIELDS PART # DESCRIPTION MEM9950 1 1/4” handlebar clamps (pr.) 1 1/4” HANDLEBAR CLAMPS •Allow you to mount a Memphis Shades Classic Deuce, Hell Cat, Demon or The Shooter to a bike with 1 1/4” handlebars •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION MEM1719 Solar HELL CAT •Sculpted full-body shape •Measures 20” W x approximately 18” H above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamp that fits 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 1 1/4” handlebar clamps sold separately (PART #MEM9950) •Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. PART # DESCRIPTION MEM2210 Clear PART # DESCRIPTION MEM2219 Solar DEMON •Measures 21” W x 18” H above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in clear and solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 1 1/4” handlebar clamps sold separately (PART #MEM9950) •Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. PART # DESCRIPTION MEM1619 Solar THE SHOOTER •Looks great on today’s wide-body motorcycles •Measures 19” W x approximately 14” H above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 1 1/4” handlebar clamps sold separately (PART #MEM9950) •Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. PART # DESCRIPTION MEM2129 Solar CLASSIC DEUCE •Smooth shape surrounds headlight to become part of the motorcycle •Measures approximately 19 1/2” W x 18 1/2” H above headlight •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Solid two-point handlebar mounting hardware fits many custom and stock applications •Includes two-point mounting hardware consisting of polished billet aluminum handlebar clamps that fit 1” and 7/8” handlebars (with sizing band) and CNC-machined aluminum rake plates, fittings and stainless steel socket head screws •Optional 1 1/4” handlebar clamps sold separately (PART #MEM9950) •Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. Clear Solar

www.dragspecialties.com

Made with FlippingBook

RkJQdWJsaXNoZXIy OTcxOTk3