SKINNY SEPTEMBER 2025

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES,INCLUDING CALIFORNIA.PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE“COMPETITION USE”ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES dragspecialties.com September 2025 FOR 20-25 CHALLENGER, 22-25 PURSUIT AND 25 CHIEFTAIN/​ROADMASTER W/ POWERPLUS MOTOR PART # DESCRIPTION EMIS* SUG. RETAIL 49-STATE 1810-3259 Brushed stainless 2 $1,999.95 1810-3260 Guardian black 2 1,999.95 PART # DESCRIPTION EMIS* SUG. RETAIL RACE ONLY 1810-3256 Brushed stainless 3 $1,599.95 1810-3258 Guardian black 3 1,599.95 QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Inspired by the S&S King Of The Baggers racing efforts • Stainless steel stepped header design to maximize power output • Full-length heat shields on front and rear header pipes • Race-inspired S&S end cap • Left side saddlebag support included • Removable dB reducer (J2825 compliant) • Made in the U.S.A. 1810-3258 1810-3259

2 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION EMIS* SUG. RETAIL FOR 25 FXLRST/​FLHC 1800-2742 Chrome 3 $1,049.95 1800-2743 Black 3 985.95 1800-2744 Stainless steel 3 1,074.95 THE RIPPER 2-INTO-1 SHORT EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M-Eight Softail exhaust systems • Stepped 13/ 4” to 17/ 8” headpipes • Fully welded one-piece design • Performance baffle core • Full heat shields • Megaphone muffler • Angle cut end cap • 18 mm O2 bungs with 12 mm adapters • Made in the U.S.A. 1800-2744 1800-2743 1800-2742

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 3 SEPTEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION EMIS* SUG. RETAIL FOR 25 FXLRS/​FXLRST, FXBB, FLHC 1801-1858 Chrome 4 $499.95 PART # DESCRIPTION EMIS* SUG. RETAIL FOR 25 FXLRS/​FXLRST, FXBB, FLHC (CONT) 1801-1859 Black 4 $499.95 4” SLIP-ON MUFFLER • 4” OD diameter slip-on muffler features 16-gauge steel construction and removable flow-through baffle • Bolt to stock locations with supplied hardware • Sold each • Made in the U.S.A. 1801-1859 1801-1858

4 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES KOLOR FLARE® WINDSHIELDS • Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop • Windshields are crafted from acrylic • Ice Kolor Flares® feature a vibrant fluorescent edge to give your motorcycle a little extra pop • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0957 2310-0946 2310-0948 2310-0950 2310-0952 2310-0954 2310-0956 2310-0947 2310-0949 2310-0951 2310-0955 FOR 24-25 FLHX, 25 FLHXU, 23-25 FLHXSE PART # DESCRIPTION SUG. RETAIL ICE KOLOR FLARE® 2310-0950 6.5” blue ice $234.95 2310-0949 6.5” green ice 234.95 2310-0947 6.5” orange ice 234.95 2310-0946 6.5” pink ice 234.95 2310-0948 6.5” yellow ice 234.95 KOLOR FLARE® 2310-0955 6.5” blue 234.95 PART # DESCRIPTION SUG. RETAIL KOLOR FLARE® (CONT) 2310-0957 6.5” bronze $234.95 2310-0954 6.5” green 234.95 2310-0952 6.5” orange 234.95 2310-0956 6.5” purple 234.95 2310-0951 6.5” red 234.95 2310-0953 6.5” yellow 234.95 2310-0953

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 5 SEPTEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL 0801-1983 Smooth, solar-reflective leather $530.95 0801-19791 Smooth, vinyl 447.95 0801-19801 Double diamond, black thread 513.95 PART # DESCRIPTION SUG. RETAIL 0801-19811 Double diamond, silver thread $532.95 0801-19821 Double diamond, red thread 532.95 1 Not solar-reflective leather. EXTENDED REACH FREEDOM TOURING SEATS • Moves the rider back 1” to 13/ 4’’ inches compared to stock seats; 1” on FLHX/​FLTRX models, 11/ 2” on FLHR models and 13/ 4” on FLHTCU models • Features solar-reflective leather in the seating area and high-quality automotive-grade vinyl on the sides (unless noted) • Features a 6” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Made to accept Drag frame-mounted backrests, sold separately • Includes all mounting hardware • Made in the U.S.A. FOR 24-25 FLHRXS, 24 FLHTK/​FLTRK, 09-23 FLHT/​FLTR/​FLHX/​FLHR (EXCEPT 23 FLHXSE/​FLTRXSE), 09-25 FLHTCUTG; 301/ 2” L OVERALL (15” W FRONT X 13” W REAR) 0801-1983 0801-1979 0801-1980 0801-1981 0801-1982

6 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL FOR 25 FLHXU, 23-25 FLHXSE/​FLTRXSE, 24-25 FLHX/​FLTRX/​FLTRXSTSE 3501-2125 Saddlebag bottoms, gloss black $2,075.00 3501-2126 Saddlebag bottoms, matte black 2,075.00 3501-2127 Saddlebag lids, gloss black 1,175.00 3501-2128 Saddlebag lids, matte black 1,175.00 PART # DESCRIPTION SUG. RETAIL FOR 14-24 FLHTK/​FLTRK, 17-25 FLHRXS, 14-23 FLHT/​FLHR/​FLHX/​FLTRX (EXCEPT 23 FLHXSE/​FLTRXSE) 3501-2121 Saddlebag bottoms, gloss black $1,950.00 3501-2122 Saddlebag bottoms, matte black 1,950.00 3501-2123 Saddlebag lids, gloss black 1,075.00 3501-2124 Saddlebag lids, matte black 1,075.00 CARBON FIBER SADDLEBAGS AND LIDS • Gives your bagger race-machine style • Pre-preg 3K full twill carbon fiber construction • Vacuum bagged and autoclave cured to aerospace/​military spec standards • Lightweight, rigid and built with strength for real-world use • Saddlebag bottoms and lids are sold in pairs; must order one set of each for a complete set of bags 3501-2125 3501-2123 PART # DESCRIPTION EMIS* SUG. RETAIL 1010-3383 Chrome 2 $499.95 1010-3384 Black anodized w/ machined accents 2 499.95 1010-3387 Blue anodized 2 499.95 PART # DESCRIPTION EMIS* SUG. RETAIL 1010-3385 Gold anodized 2 $499.95 1010-3386 Red anodized 2 499.95 STAGE II OVAL AIR CLEANERS • Feature an oval shape and an open face filter design for maximum airflow • Low profile design for ample legroom • Radius design backing plate engineered for horsepower and torque through unobstructed airflow • Performance black pre-oiled air filter features a high flow pleated top and pleated perimeter to take in airflow from all directions resulting in increased performance • Air filter is washable and reusable • Includes backing plate assembly, air filter, outer cover assembly and all necessary hardware FOR 24-25 FLHX/​FLHXU/​FLTRX/​FLTRXSTSE, 23-25 FLHXSE/​FLTRXSE, 25 SOFTAIL 1010-3383 1010-3384 1010-3385 1010-3387 1010-3386

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 7 SEPTEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION EMIS* SUG. RETAIL 1020-4287 For 23-25 FLHXSE/​FLTRXSE, 24-25 FLHX/​FLHXU/​FLTRX/​FLTRXSTSE, 25 FXBB/​FXBR/​FXLRS/​FXLRST/​FLHC/​FLFB/​FLSTFI 2 $522.21 POWER VISION 4 • Flash tunes to your ECU – no setup required, just create an account, select your tune, flash and enjoy the ultimate ride • Access to a vast database of pre-loaded tunes for different configurations • Easily download and manage pre-loaded and custom tunes • Record real-time engine data and display in WinPEP 8 Data Center • Optimized for remote tuning so you can easily ride, record and share data logs and tunes • Read, review, clear and share diagnostic trouble codes (DTCs) with built-in descriptions • Supports licensing additional vehicles • Return to stock at any time, your original factory tune is safely backed up on the cloud and on your phone PART # DESCRIPTION EMIS* SUG. RETAIL 1020-4288 For 23-25 FLHXSE/​FLTRXSE, 24-25 FLHX/​FLHXU/​FLTRX/​FLTRXSTSE, 25 FXBB/​FXBR/​FXLRS/​FXLRST/​FLHC/​FLFB/​FLSTFI 2 $555.54 POWER VISION 3 • Flash performance tunes via OEM diagnostic connector, no need to remove and send out ECU • Display vehicle data channels in real-time • Weather-resistant for use in all conditions • High-contrast display, viewable in direct sunlight • Fueling revised for maximum power and torque • Spark timing optimized for 91-93 octane fuel • Rev limit raised • Speed limit raised • Made in the U.S.A. NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. • See Dynojet website: http://​www.dynojet.com/ ​powervision-tune-license-programs.aspx for information about purchasing additional Power Vision tune licenses • Made in the U.S.A. NOTE: All Power Vision returns and/or adjustments must be made directly with Dynojet Research. The Power Vision may be used on any bike to read and clean trouble codes. PART # DESCRIPTION SUG. RETAIL FOR 17-21 114”/​117” M-EIGHT (4.125” BORE) USING 120” BIG BORE KIT 0912-0969 Standard $29.95 0912-0968 +0.020” 29.95 PART # DESCRIPTION SUG. RETAIL FOR 17-21 114”/​117” M-EIGHT (4.25” BORE) USING 124” OR 128” BIG BORE KITS 0912-0970 Standard $39.95 0912-0971 +0.005” 39.95 REPLACEMENT RINGS FOR SUPER-DUTY BIG BORE M-EIGHT PISTON KITS • Sold in pairs 0912-0969 0912-0970

8 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES FOR 17-25 M-EIGHT (EXCEPT VVT MODELS) PART # DESCRIPTION EMIS* SUG. RETAIL 0925-1629 Chain drive 3 $295.95 PART # DESCRIPTION EMIS* SUG. RETAIL 0925-1630 Gear drive 3 $465.95 GRIND VALVE TIMING INTAKE VALVE TIMING EXHAUST VALVE DURATION INTAKE VALVE DURATION EXHAUST VALVE LIFT INTAKE VALVE LIFT EXHAUST LOBE CENTER LINE INTAKE LOBE CENTER LINE EXHAUST VALVE LIFT @TDC INTAKE VALVE LIFT @TDC EXHAUST HPT496C/G 496C 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” 496G 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” HPT496 CAM KITS FOR M-EIGHT • Bolt-in design • Available in chain drive or gear drive • Compatible with stock or S&S rocker arms and springs • Compatible with round or oval port valve springs • Boosts horsepower and torque • Racy, aggressive lope at idle FOR 17-25 M-EIGHT (EXCEPT VVT MODELS) PART # DESCRIPTION EMIS* SUG. RETAIL 0925-1631 Chain drive 3 $219.95 PART # DESCRIPTION EMIS* SUG. RETAIL 0925-1632 Gear drive 3 $219.95 GRIND VALVE TIMING INTAKE VALVE TIMING EXHAUST VALVE DURATION INTAKE VALVE DURATION EXHAUST VALVE LIFT INTAKE VALVE LIFT EXHAUST LOBE CENTER LINE INTAKE LOBE CENTER LINE EXHAUST VALVE LIFT @TDC INTAKE VALVE LIFT @TDC EXHAUST HPT496C/G 496C 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” 496G 7/40 48/15 227 243 0.485” 0.485” 107 106 0.072” 0.097” HPT 496 CAMS FOR M-EIGHT • Available in chain drive or gear drive styles • Compatible with stock or S&S rocker arms and springs • Compatible with round or oval port valve springs • Boosts horsepower and torque • Racy, aggressive lope at idle • Made in the U.S.A. 0925-1631 0925-1629 0925-1630 • Kits include all required bearings, gasket and O-rings and hardware • Made in the U.S.A. NOTE: Not for use with VVT models. NOTE: 0.496” lift when used with S&S rocker arms. NOTE: Not for use with VVT models. NOTE: 0.496” lift when used with S&S rocker arms. NOTE: Gears for gear drive cam sold separately, see page 837 of the 2025 Drag Specialties FatBook.

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 9 SEPTEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL 1131-3979 For 17-25 M-Eight $589.00 PART # DESCRIPTION SUG. RETAIL 1131-3980 For 07-17 Twin Cam $589.00 REPLACEMENT RADIUSCX CLUTCH PACKS • Replacement clutch pack for Rekluse RadiusCX auto clutch only • Includes TorqDrive® friction disks, steel drive plates, EXP bases (two halves) and PTFE pads for wedge service • Not compatible with other Rekluse auto clutch systems • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1131-3972 For 07-24 Big Twin $439.00 REPLACEMENT APEX CLUTCH PACK • Replacement clutch pack for Apex clutch only • Includes (17) TorqDrive® friction plates, (18) 12-pin drive plates and (12) basket sleeves. • Made in the U.S.A. 1131-3980 1131-3979

10 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES ÖHLINS Öhlins suspension has been a cornerstone of motorcycle and motorsports top level suspension systems for more than 45 years. The STX line of shock absorbers for M-Eight Softails offer a dramatic suspension performance upgrade that boosts rider confidence and improves the quality and comfort of the ride. PART # LENGTH ADJUSTABLE RATE N/MM STROKE SUG. RIDER WEIGHT SUG. RETAIL FOR 18-19/25 FLFB, 18-24 FLFBS, 18-20 FLDE, 18-21/25 FLHC, 18-24 FLHCS, 18-21 FLSB/​FLSL, 18-20/22/25 FXBB, 21-24 FXBBS, 18-19/22-25 FXBR,19-20 FXDRS,18-19 FXFB, 18-21/23 FXFBS,18-20 FXLR, 20-25 FXLRS, 22-25 FXLRST, 22 FXRST, 20-24 FXST 1310-2521 13.5” Preload, rebound 115 2.244” 170 to 250 lbs. $1,199.00 STX PRO SHOCK • STX single-tube design • Monotube shock with hose-mounted external shock reservoir • High-pressure nitrogen gas-charged • 46 mm piston diameter • Adjustable rebound damping • Hose-mounted hydraulic preload adjuster • Top-level comfort, rideability, and performance • Hard-anodized precision CNC-machined components • Low-friction shaft and shock seal head design • Fully serviceable and rebuildable • Sold each

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 11 SEPTEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # LENGTH ADJUSTABLE RATE N/MM STROKE SUG. RIDER WEIGHT SUG. RETAIL FOR 18-19 FXFB, 18-21 FLHC, 18-21/23 FXFBS, 18-24 FLHCS, 22 FXBBS 1310-2402 13.5” Preload 105 2.244” 170 to 250 lbs. $999.00 FOR 18-19 FXBR/​FLFLB, 18-20 FXBRS, 18-21 FLSB, 18-24 FLFBS, 19-20 FXDRS, 23-24 FXBR 1310-2401 12.5” Preload 105 1.713” 150 to 220 lbs. 999.00 FOR 18-20 FLDE/​FXLR/​FXBB, 18-21 FLSL, 21/23-24 FXBBS, 22 FXBB, 20-24 FXLRS 1310-2420 12.5” Preload 105 1.713” 150 to 220 lbs. 999.00 FOR 22-24 FXLRST 1310-2522 13.5” Preload 115 2.244” 170 to 250 lbs. 999.00 STX SHOCKS • STX single-tube design • Monotube shock with internal reservoir • High-pressure nitrogen gas-charged • 46 mm piston diameter • Hose-mounted hydraulic preload adjuster • Top-level comfort, rideability, and performance • Hard-anodized precision CNC-machined components • Low-friction shaft and shock seal head design • Fully serviceable and rebuildable • Sold each 1310-2401

12 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES KODLIN USA The new line of NXL Redline products from Kodlin U.S.A. feature high-quality CNC-machined billet aluminum construction with an eye-catching red powdercoat finish to really set your bike apart from the crowd. Floorboards, footpegs and shift pegs are now available for Twin Cam and M-Eight applications. PART # DESCRIPTION SUG. RETAIL 1621-1225 For 80-25 FLHT/F​ LHR/​FLHX/​FLTR/​FLTRU/​FLTRK/​FLTRX, 09-25 H-D FL Trikes, 00-17 FLST/​FLSTC/​FLSTN/​FLSTF and 12-16 FLD $549.99 NXL REDLINE DRIVER FLOORBOARDS • Made from CNC-machined billet aluminum with brushed stainless steel cover and a red powdercoated aluminum accent plate • Extremely light with enhanced foot traction • All hardware included • Dimensions: 10” L x 4.5” W • Thickness: 0.6” • Weight: 0.8 lb. (each) • Matching mini rear boards and shift pegs available • Sold in pairs

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 13 SEPTEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL 1621-1226 NXL redline mini boards $449.99 NXL REDLINE MINI BOARDS • Made from CNC-machined billet aluminum with brushed stainless steel cover and a red powdercoated aluminum accent plate • Extremely light with enhanced foot traction • All hardware included • Dimensions: 6” L x 3.5” W • Thickness: 0.6” • Weight: 0.4 lb. (each) • Can be used as driver or passenger boards with the purchase of a Kodlin model specific splined adapters (PART #s 1620-2393, 1620-2394 or 1620-2395) sold separately • Sold in pairs PART # DESCRIPTION SUG. RETAIL 1620-2765 M-Eight Softail/​ELW/​Pan America Driver footpegs (pr.) $299.99 1603-0421 Shift peg (ea.) 79.99 NXL REDLINE FOOTPEGS AND SHIFT PEG • Made from CNC-machined billet aluminum with brushed stainless steel cover and a red powdercoated aluminum accent plate • Extremely light with enhanced foot traction • All hardware included • Footpeg dimensions: 2.7” L x 3.5” W x 0.6” Thick • Footpeg weight: 0.4 lb. (each) • Matching floorboards, mini boards, footpegs point and derby covers available NOTE: See page 1884 of the 2025 Drag Specialties FatBook for an explanation of footpeg mount styles. 1620-2765 1603-0421

14 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES FIGURATI DESIGNS Jewelry-grade accessories for your American Big Twin! Company founder Kerry Cromer spent more than a decade as a jewelry wholesaler, his experience in that market shows in the level of quality and detail in every Figurati part. Made using 316L jewelry-grade stainless steel, each piece is laser engraved (not machined) and hand-detailed. True heirloom pieces, these parts are designed to add an incredible little piece of art to your motorcycle and last a lifetime. PART # DESCRIPTION SUG. RETAIL FOR 07-16 TOURING AND 09-16 H-D TRIKE 0710-0322 Curved black $169.95 PART # DESCRIPTION SUG. RETAIL FOR 07-16 TOURING AND 09-16 H-D TRIKE (CONT) 0710-0321 Knurled black $169.95 PERFORMANCE OIL DIPSTICKS • 316L Marine grade • Stainless steel cap • Powerful 1500 Gauss neodymium magnet • High visibility • Anti-fingerprint technology PART # DESCRIPTION SUG. RETAIL FOR 24-25 FLHX/​FLTRX/​FLTRXSTSE, 23-25 FLHXSE/​FLTRXSE, 25 SOFTAIL 0630-3391 Chrome $74.95 0630-3392 Black 74.95 FOR 17-25 FLHRXS, 24 FLHTK/​FLTRK, 08-23 FLHT/​FLHR/​FLHX/​FLTR (EXCEPT 23 FLHXSE/​FLTRXSE), 09-25 H-D FL TRIKE, 16-24 SOFTAIL, 20-23 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-3389 Chrome 74.95 0630-3390 Black 74.95 FOR 99-17 TWIN CAM AND 86-22 XL (EXCEPT 08-17 DRESSER/H-D FL TRIKE, 16-17 SOFTAIL, 16-17 FXDLS, 13-15 FXSBSE, 11-12 FLSTSE AND RH SPORTSTER) 0630-3387 Chrome 74.95 0630-3388 Black 74.95 K25 GRIPS • Super soft, tacky and durable surface • Billet aluminum construction with Kraton rubber grip area • Diamond knurled with closed ends • Small diameter grip helps reduce hand fatigue • Fit 1” handlebars • Sold in pairs 0710-0322 0710-0321 0630-3390 0630-3387 0630-3391

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 15 SEPTEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES CHROME PART # SUG. RETAIL GLOSS BLACK PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK FOR 24-25 FLHX, 25 FLHXU, 23-25 FLHXSE (1” DIA. CLAMPING AREA) 0601-6844 $824.95 0601-6845 $824.95 12” 36” 15” 9” 0601-6846 824.95 0601-6847 824.95 14” 36” 15” 9” FOR 24-25 FLTRX, 23-25 FLTRXSE (11/ 4” DIA. CLAMPING AREA) 0601-6848 824.95 0601-6849 824.95 14” 35” 101/ 4” 8” 0601-6850 824.95 0601-6851 824.95 16” 35” 101/ 4” 8” EZ INSTALL 11/ 2” FLAT TOP HANDLEBAR KITS • EZ Install handlebar kits include everything needed to install our handlebars in half of the time of other kits - just remove the handlebars from the box and install them on your motorcycle • Handlebars now come wired for your handlebar controls • Our top corner feature is a non-welded corner we machine from billet steel with a smooth internal wire cavity that won’t damage the internal wiring • CNC mandrel-bent from 11/ 2” diameter x 0.095” wall heavy tube • Bolt-together, two-piece handlebar that takes up half the shelf space and is easy to ship 0601-6844 • Available in chrome or gloss black powdercoated finish • Gloss black bars come with black brake line/​cable extensions • Chrome bars come with braided brake line/​cable extensions • Made in the U.S.A. NOTE: Our handlebar kits do not replace existing lines and cables. We extended them. NOTE: Accepts OEM heated grips. U.S. Patent # 10,946,926. 0601-6851

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com 9901-3563 SEPTEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES FOR 24-25 FLTRX PART # DESCRIPTION SUG. RETAIL TOP 0408-0452 Chrome $729.95 0408-0451 Black 649.95 PART # DESCRIPTION SUG. RETAIL BOTTOM 0408-0454 Chrome $499.95 0408-0453 Black 449.95 TRIPLE TREES • 6061-T6 aluminum construction • Two mounting locations for risers: stock and 1.35” closer to the rider • Remove the block off plate and use your OEM steering lock and key w/ no other pieces needed • Comes with billet stem cap and bolt • Riser bushings not required • Hardware included • Made in U.S.A. NOTE: Not compatible with CVO or CVO ST models. PART # DESCRIPTION SUG. RETAIL FOR 14-24 FLHT/​FLHX/​FLHR/​FLTR 1303-0394 Black anodized $179.95 PART # DESCRIPTION SUG. RETAIL FOR 14-24 FLHT/​FLHX/​FLHR/​FLTR (CONT) 1303-0393 Raw machined $169.95 SWINGARM PIVOT BLOCKS • Weighs less than half that of stock pivot block • CNC machined 6061 T-6 aluminum • Designed to OEM specs • Hardware not included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 23-24 FLHXSE/​FLTRXSE, 24 FLHX/​FLTRX/​FLTRXSTSE 2030-2419 Chrome $129.99 PART # DESCRIPTION SUG. RETAIL FOR 23-24 FLHXSE/​FLTRXSE, 24 FLHX/​FLTRX/​FLTRXSTSE (CONT) 2030-2420 Black $129.99 CURVED LICENSE PLATE FRAME KIT WITH LED PLATE LIGHT • Aluminum frame and backing plate with curved design and integrated bright white LEDs • Plug-and-play installation • Fits standard 4” H x 7” W license plate 1303-0393 1303-0394 0408-0451 0408-0452 0408-0454 0408-0453 2030-2420 2030-2419

RkJQdWJsaXNoZXIy OTcxOTk3