SKINNY NOVEMBER 2025

2 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION EMIS* SUG. RETAIL FOR 18-25 FXFB/FXFBS/FXBB/FXLRS/FLSL/FXST 1800-27511, 2 Chrome 2 $1,249.95 1800-27491 Black 3 985.95 1800-27521, 2 Black 2 1,185.95 1800-27501 Stainless steel 3 1,074.95 1800-27531, 2 Stainless steel 2 1,273.95 PART # DESCRIPTION EMIS* SUG. RETAIL FOR 22-25 FXLRST/FXRST/FLHC 1800-27452 Chrome 2 $1,249.95 1800-27462 Black 2 1,185.95 1800-27472 Stainless steel 2 1,273.95 1 Will fit 22-25 FXLRST/FXRST/FLHC if exhaust bracket PART #1861-1837 is used (sold separately). 2 Catalyzed compliant baffle core. THE RIPPER 2-INTO-1 SHORT EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M-Eight Softail exhaust systems • Stepped 13/ 4” to 17/ 8” headpipes • Fully welded one-piece design • Select systems feature a catalyzed compliant baffle core (see chart) • Full heat shields • Angle cut end cap • 18 mm O2 bungs with 12 mm adapters • Made in the U.S.A. 1800-2749 1800-2750 1800-2745 1800-2747

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 3 NOVEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES FOR 17-25 FLHT/FLHR/FLHX/FLTRX/FLTRU PART # DESCRIPTION EMIS* SUG. RETAIL 49-STATE 1800-2760 Chrome 2 $1,295.95 1800-2759 Guardian Black 2 1,295.95 PART # DESCRIPTION EMIS* SUG. RETAIL RACE ONLY 1800-2758 Chrome 3 $995.95 1800-2757 Guardian Black 3 995.95 2-INTO-1 GNX EXHAUST SYSTEMS • Adds a clean, sleek appearance to your Touring bike • Deep exhaust tone and increased performance • 4.5” OD muffler body • Louvered baffle • Race-inspired Grand National end cap • Removable dB reducer (J2825 compliant) • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 4405-1045 For 98-13 FLHT/FLHR/FLTR, 06-13 FLHX w/ hard saddlebags $649.95 RETRO CUT-IN SPEAKER LID KIT WITH SPEAKERS • Well thought out design radically reduces standing water on speakers when parked • More of the speaker is exposed than current offerings ensuring maximum sound potential • Properly designed kit has speakers pointing towards the rider for optimal sound • Upgraded wire harness covered in “Nyla braid” with custom inline grommet for bags • Supplied template makes cutting lids much easier than current offerings. • 1 mm thick “boot worthy” grill mesh • Sleek design follows lines of bike much better than current offerings • Includes adapters with grills, 6” x 9” speakers, cutting templates, wiring, and all required hardware to complete the installation • Available in matte black, primed and ready for paint U.S. Patent # D1022962. NOTE: Required amplifier is not included. PART # DESCRIPTION SUG. RETAIL 4405-1044 For 20-24 FLHTK/FLTRK, 14-23 FLHTCU/FLHTCUL/ FLHTCULTC/FLHTKL/FLTRU/ FLTRX, 14-24 FLHTCUTG w/ factory rear speaker pods $49.99 REPLACEMENT SPEAKER GRILLES FOR TOUR-PAK • Steel mesh • Dimensions: 63/ 4” L x 63/ 4” W x 5/ 8” H • Black finish • Sold in pairs 1800-2757 1800-2758

4 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE; 291/ 2” L OVERALL (14” L X 111/ 2” W FRONT) (101/ 2” L X 61/ 2” W REAR) 0801-2101 Smooth, solar-reflective leather $536.95 0801-20971 Smooth, vinyl 451.95 0801-20981 Double diamond, black thread 525.95 0801-21001 Double diamond, red thread 546.95 0801-20991 Double diamond, silver thread 546.95 1 Not solar-reflective leather. FREEDOM TOURING SEATS • Features solar-reflective leather in the seating area and highquality automotive-grade vinyl on the sides (unless noted) • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Also works with H-D OEM frame-mounted backrest mechanism and backrest pad, sold separately • Includes all mounting hardware • Made in the U.S.A. 0801-2101 0801-2098 0801-2100 0801-2099

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 5 NOVEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL FOR 24-25 FLHX/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE; 29” L OVERALL (121/ 2” W FRONT X 61/ 2” W REAR) 0801-21501 Double diamond, black thread w/ Slip Stop, and black logo $552.95 0801-21511 Double diamond, gray thread w/ Slip Stop, and gray logo 552.95 FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLTR/FLHR (EXCEPT 23 FLHXSE/FLTRXSE) ; 31” L OVERALL (12” W FRONT X 61/ 2” W REAR) 0801-21522 Double diamond, black thread w/ Slip Stop™, and black logo 557.95 0801-21532 Double diamond, gray thread w/ Slip Stop, and gray logo 557.95 FOR 97-07 FLHR, 06-07 FLHX; 31” L OVERALL (111/ 2” W FRONT X 7” W REAR) 0801-21483 Double diamond, black thread w/ Slip Stop, and black logo 552.95 0801-21493 Double diamond, gray thread w/ Slip Stop, and gray logo 552.95 1 Features a 63/ 4” tall driver support. 2 Features a 7” tall driver support. 3 Features a 71/ 2” tall driver support. HIGHNOON 2-UP SEATS • Features a 63/ 4”, 7” or 71/ 2” tall driver support with unique styling (as noted) • Made from Slip Stop™ high-quality PVC material in the seating area and high-quality automotive-grade vinyl on the sides • Slip Stop high-quality PVC material is designed with gripping qualities to reduce slippage • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 18-25 FXLR/FXLRS/FXLRST, 18-21 FLSB; 29” L OVERALL (121/ 2” W FRONT X 6” W REAR) 0802-1671 Double diamond, black thread w/ Slip Stop, and black logo $582.95 0802-1672 Double Diamond, gray thread w/ Slip Stop, and gray logo 582.95 HIGHNOON 2-UP SEATS • Features a 81/ 2” tall driver support with unique styling • Made from Slip Stop™ high-quality PVC material in the seating area and high-quality automotive-grade vinyl on the sides • Slip Stop high-quality PVC material is designed with gripping qualities to reduce slippage • Molded polyurethane foam for maximum comfort and styling 0802-1672 0802-1671 • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Includes all mounting hardware • Made in the U.S.A. 0801-2150 0801-2153 0801-2149

6 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES SADDLEMEN® Saddlemen® is proud to team up with the Thrashin’ to offer a line of performance seats for the latest M-Eight bikes. The low profile seating position and tuck-n-roll construction give a comfortable, secure seating position and add sleek style to your ride. PART # DESCRIPTION SUG. RETAIL FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE 0801-2136 Smooth $510.00 0801-2137 TR 515.00 PART # DESCRIPTION SUG. RETAIL FOR 24-25 FLHRXS, 24 FLHTK/FLTRK, 08-23 FLHT/FLHX/FLHR/FLTR/FLTRU/ FLTRK/FLTRX (EXCEPT 23 FLHXSE/FLTRXSE) AND 09-13 H-D FL TRIKE 0801-2134 Smooth $485.00 0801-2135 TR 490.00 PART # DESCRIPTION SUG. RETAIL FOR 18-25 FXLR/FXLRS/FXLRST, 18-21 FLSB 0802-1667 Smooth $459.00 0802-1668 TR 464.00 PART # DESCRIPTION SUG. RETAIL FOR 18-25 FXBB/FXBBS/FXST 0802-1669 Smooth $459.00 0802-1670 TR 464.00 THRASHIN’® PRO SERIES SEATS • Saddlemen® is proud to partner with the Thrashin’® crew on this line of performance-driven seats • Low profile and contoured for comfort • TR seats showcase true tuck-n’-roll construction • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant self-skinning process that seals the foam and enhances the seat’s durability • Feature whisper Saddlehyde™ fabric • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 06-17 FLD/FXD/FXDWG (EXCEPT FXDF) 0803-0761 Smooth $459.00 PART # DESCRIPTION SUG. RETAIL FOR 06-17 FLD/FXD/FXDWG (EXCEPT FXDF) (CONT) 0803-0762 TR $464.00 THRASHIN’® PRO SERIES SEATS • Saddlemen® is proud to partner with the Thrashin’® crew on this line of performance-driven seats • Low profile and contoured for comfort • TR seats showcase true tuck-n’-roll construction • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant self-skinning process that seals the foam and enhances the seat’s durability • Feature whisper Saddlehyde™ fabric • Made in the U.S.A. THRASHIN’® PRO SERIES SEATS • Saddlemen® is proud to partner with the Thrashin’® crew on this line of performance-driven seats • Low profile and contoured for comfort • TR seats showcase true tuck-n’-roll construction • Combines a GelCore™ interior and Ultra-Foam to create a foam that is a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant self-skinning process that seals the foam and enhances the seat’s durability • Feature whisper Saddlehyde™ fabric • Made in the U.S.A. 0801-2135 0801-2136 0802-1667 0802-1670 0803-0761 0803-0762

8 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION EMIS* SUG. RETAIL FOR 18-24 M-EIGHT SOFTAIL 0901-0266 W/ 550G cam 3 $12,495.95 PART # DESCRIPTION EMIS* SUG. RETAIL FOR 18-24 M-EIGHT SOFTAIL (CONT) 0901-0267 W/ 475G cam 3 $12,495.95 MK136 BLACK EDITION ENGINE FOR OIL-COOLED M-EIGHT • Complete crate engine, fully assembled • High-flow cylinder heads with premium valves, valve seats, guides, springs and seals • Intake and exhaust valves are +1 mm oversized and 0.030” longer than stock for improved valve train geometry • 0.605” lift valve springs • Gear-drive cam • High-strength alloy used in the cylinder head casting for improved strength at high temperatures • Enlarged cooling passages around the exhaust seats • S&S exclusive design breather boxes • Forged pistons • S&S Performance oil pump and cam support plate • Premium valve tappets and tappet cuffs • Billet aluminum engine and valve covers • Sprocket shaft spacer included • Champion brand spark plugs included • Retains stock engine height • Cam cover badge included • Black powdercoat finish matches the factory finish 0901-0267 PART # DESCRIPTION SUG. RETAIL FOR 24-25 FLHX/FLHXU/FLTRX/FLTRXSTSE, 23-25 FLHXSE/FLTRXSE (151/ 2” W DRIVER’S SEAT AREA) 0801-2160 W/ dark cherry stitching $770.00 0801-2161 W/ mandarin orange stitching 770.00 0801-2162 W/ sky blue stitching 770.00 PART # DESCRIPTION SUG. RETAIL OPTIONAL PASSENGER SEATS (12” W PASSENGER SEAT AREA) 0801-2163 W/ dark cherry stitching $375.00 0801-2164 W/ mandarin orange stitching 375.00 0801-2165 W/ sky blue stitching 375.00 DELUXE TOURING SOLO SEATS WITH BACKREST • Seat pattern features an eye-catching carbon fiber inlay • Driver’s backrest is fully adjustable and removable • Bucket-style saddle positions the driver comfortably in the seat for a more controlled ride • Mustang’s own proprietary controlled-density foam formula requires no break-in and retains it’s shape and support for years of durable, reliable comfort 0801-2160 0801-2163 0801-2162 0801-2165 • Marine-grade fiberglass seat baseplate with polyurethane seat bumpers to absorb vibration • High-quality expanded vinyl seat cover has the appearance of leather but is more durable to withstand the elements • Optional matching passenger seats available (sold separately) • Made in the U.S.A. • Crankcase features dual-spray piston cooling jets • Precision-machined oil scraper • Enlarged oil sump • Contoured oil pan floor allows oil to easily drain back to the sump • Made in the U.S.A.

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 9 NOVEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION EMIS* SUG. RETAIL FOR 17-25 M-EIGHT OIL-COOLED ENGINES 0904-0163 Wrinkle black w/ non-highlighted cylinder fins, chain drive cam 3 $3,359.95 0904-0164 Wrinkle black w/ highlighted cylinder fins, chain drive cam 3 3,359.95 FOR 17-25 M-EIGHT WATER-COOLED ENGINES 0904-0168 Black granite w/ highlighted cylinder fins, chain drive cam 3 3,359.95 0904-0169 Wrinkle black w/ highlighted cylinder fins, chain drive cam 3 3,359.95 0904-0161 Wrinkle black w/ highlighted cylinder fins, gear drive cam 3 3,559.95 132” POWER PACKAGES FOR M-EIGHT • Big-bore bolt-on kit increases your 114”/117” with 4.5” stroke M-Eight to 132” with no case machining required • Big bore 4.32” cylinders with 11:1 forged pistons • S&S oil pump/cam plate with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screen in both scavenge pickups • Magnet in cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the oil feed and scavenge side • Adjustable pressure relief valve can be adjusted with the unit installed in the engine • Quickee pushrods with chrome pushrod tubes • S&S premium tappets • S&S hard-anodized, black coated tappet cuffs are billet aluminum construction • Improved tappet stability in high-lift, high-rpm situations • S&S 550 cams designed for big bore applications (gear or chain drive cams available) • S&S valve springs; work with cams up to 0.605” lift • High-performance conical single-wire spring design • All necessary gaskets, bearings and hardware for bolt-on installation included • Original engine serial numbers are retained • Made in the U.S.A. NOTE: Not for 121” CVO models. 0904-0164 0904-0161

10 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION EMIS* SUG. RETAIL FOR 17-25 M-EIGHT OIL-COOLED ENGINES 0904-0167 Wrinkle black w/ highlighted fins and chrome pushrod tubes, chain drive cam 3 $3,359.95 0904-0166 Wrinkle black w/ highlighted fins and black pushrod tubes, chain drive cam 3 3,359.95 0904-0165 Wrinkle black w/o highlighted fins and black pushrod tubes, chain drive cam 3 3,359.95 129” POWER PACKAGES FOR M-EIGHT • Big-bore bolt-on kit increases your 107” M-Eight to 129” with no case machining required • 4.32” bore cylinders with 11:1 forged pistons • S&S oil pump/cam plate with a blue anodized finish • Passage plugs are removable for servicing • Independent scavenge sections for flywheel cavity and cam chest • Debris screen in both scavenge pickups • Magnet in cam chest to help prevent debris from entering the oil pump • Increased oil flow capacity on both the oil feed and scavenge side • Adjustable pressure relief valve can be adjusted with the unit installed in the engine • Quickee pushrods with chrome pushrod tubes • S&S premium tappets • S&S hard-anodized, black coated tappet cuffs are billet aluminum construction • Improve tappet stability in high-lift, high-rpm situations • S&S 550 cams designed for big bore applications • S&S valve springs; work with cams up to 0.605” lift • High-performance conical single-wire spring design • All necessary gaskets, bearings and hardware for bolt-on installation included • Made in the U.S.A. 0904-0165 0904-0167

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 11 NOVEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES TRASK PERFORMANCE Trask Performance is one of the top tuning shops in the world for American V-Twin motorcycles. Their latest innovation is the Derby Cover And Power Plate Kit, designed to boost clutch performance and eliminate clutch slip in high-performance M-Eight engines. A bolt-on upgrade to your bike’s driveline that boosts performance and adds custom style. PART # DESCRIPTION SUG. RETAIL FOR 17-25 FLH/FLHT/FLHTC/FLHTK/FLHTKL/FLHTKSE/FLHFB/FLHX/FLHXS/ FLHXST/FLHXSE/FLTRU/FLTRX/FLTRXS/FLTRXST/FLHR/FLHRXS/FLTRT 1107-0765 Chrome derby cover, black power plate $429.95 1107-0767 Chrome derby cover, gold power plate 429.95 1107-0766 Chrome derby cover, red power plate 429.95 1107-0762 Black derby cover, black power plate 429.95 1107-0764 Black derby cover, gold power plate 429.95 1107-0763 Black derby cover, red power plate 429.95 PART # DESCRIPTION SUG. RETAIL FOR 19-25 FXBB/FXBBS/FXBR/FXBRS/FXFB/FXFBS/FXLR/FXLRS/ FXLRST/FXRST/FLDE/FLFB/FLFBS/FLHC/FLHCS/FLSL, 18 FLSB 1107-0771 Chrome derby cover, black power plate $429.95 1107-0773 Chrome derby cover, gold power plate 429.95 1107-0772 Chrome derby cover, red power plate 429.95 1107-0768 Black derby cover, black power plate 429.95 1107-0770 Black derby cover, gold power plate 429.95 1107-0769 Black derby cover, red power plate 429.95 DERBY COVER AND POWER PLATE COMBO KIT • Includes billet aluminum derby cover and Trask Power Plate clutch upgrade • Power Plate replaces stock clutch pressure plate with a stronger billet version • Includes upgraded springs to handle up to 200 hp with stock clutch pack • Prevents clutch slippage resulting from motor upgrades • Derby cover offers custom styling with precision-machined finish • Bolt-on installation with hardware included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0923-0715 For 17-25 M-Eight $769.95 CONNECTING ROD KIT • Maintains OEM fit and reliability • Custom made H-beam connecting rods • Fits 43/ 8” and 41/ 2” stroke M8 crankshaft • Includes H-beam connecting rods, crank pin and bearing set 1107-0762 1107-0769 1107-0770 1107-0773 1107-0766 1107-0765

12 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL 2120-1447 For 17-22 M-Eight and 99-17 Twin Cam; repl. OEM #32435-97 $157.95 IGNITION WIRING HARNESS • Complete early-style ignition wiring harness • Direct replacement for the OEM harness; also works great for custom jobs when converting from EFI to a carburetor • Plug-in installation • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2120-1493 For 21-25 RH1250S (+15”) $69.95 SPEEDOMETER WIRE HARNESS EXTENSION • Allows for the relocation of the OEM or an aftermarket speedometer using the 12-position OEM wiring connector • Direct plug-in installation to the stock wiring harness • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2120-1446 For 25 FXLRS/FXLRST/FXBR/FLFB/FLHC $89.95 +18” HANDLEBAR WIRE HARNESS EXTENSION KIT • Designed and tested to extend your wiring without causing any harm or interference to the motorcycle’s computer when installing taller handlebars • Color coded to connect to the existing Molex connector; simply plug and play • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL LEFT 0640-1857 Chrome $99.99 0640-1858 Gloss black 99.99 0640-1856 Matte black 99.99 PART # DESCRIPTION SUG. RETAIL RIGHT 0640-1860 Chrome $99.99 0640-1861 Gloss black 99.99 0640-1859 Matte black 99.99 ASCENT PRO MIRRORS • Elevate your bar setup with the clean, aggressive design of the Kodlin Ascent Pro Mirrors • Featuring signature Ascent Pro machining details, these mirrors combine premium aesthetics with exceptional performance • Precision-forged mirror head and stem from billet aluminum • Heavy-duty proprietary internal pivot system crafted from stainless steel • Ultra-slim mirror profile delivers outstanding rear visibility • Available in chrome, gloss black and matte black finishes • Universal H-D fitment • Perfectly complement the rest of the Kodlin Ascent Pro lineup as well as other Kodlin covers • Sold each 0640-1857 0640-1856 0640-1861

14 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES FRONT BRAKE ROTORS DESCRIPTION LEFT FRONT PART # RIGHT FRONT PART # SUG. RETAIL For 14-23 FLHT/FLHX/FLTRX/FLTRU, 14-19 FLHTK, 20-25 FLHRXS, 17-19 FLHR , 08-17 FXDF, 14-17 FXDL/FXDLS 1710-2443 1710-2443 $239.29 For 25 FLHXU, 24-25 FLHX/FLTRX and 21-25 RA1250/S/ST 1710-4837 1710-4837 173.04 For 09 XL1200R, 10-12 XR1200 1710-4836 1710-4836 191.45 FRONT BRAKE ROTORS • Provide better braking, improved brake alignment, no rotor distortion, reduced chance of rotor cracking and stylish looks • Unique low-carbon rotors • Available in standard diameter which bolt on with no modifications and utilize standard H-D calipers PART # DESCRIPTION SUG. RETAIL LEFT 1701-0815 Gray $549.95 1701-0816 Red 549.95 1701-0817 White 549.95 PART # DESCRIPTION SUG. RETAIL RIGHT 1701-0812 Gray $549.95 1701-0813 Red 549.95 1701-0814 White 549.95 RACE SERIES RADIAL MOUNT FRONT CALIPERS WITH ARC TECHNOLOGY • CNC machined from billet aluminum • Increased rigidity for improved braking performance • Advanced Radiant Cooling (ARC) Technology for maximum cooling efficiency • Designed for use with 0.200” thick brake rotors • For use with radial caliper mounts with 108 mm mounting bolt spacing (sold separately) • Chrome mounting hardware included • Made in U.S.A. 1701-0816 1701-0817 1701-0812 1710-2443 1710-4836 1710-4837

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. 15 NOVEMBER 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL FOR 17-25 FLHT/FLHR/FLHX/FLHXU/FLTRX/FLTRU/FLTRK 0414-0781 227/ 8” (stock length) $899.95 FOR 18-25 FXBB/FXBBS/FXBR/FXBRS/FXST/FLHC/FLHCS, 18-21 FLDE/FLSL, 18-20 FXLR 0414-0779 233/ 4” (stock length) 899.95 FOR 18-25 FLFB/FLFBS 0414-0780 237/ 8” (stock length) 899.95 FOR 06-17 FXD/FXDWG 0414-0778 251/ 2” (FXD; stock length) 899.95 0414-0778 271/ 2” (FXDWG; stock length) 899.95 FOR 16-22 XL1200X/1200XS 0414-0782 241/ 2” (stock length) 899.95 FORK CARTRIDGE KITS • Designed for 06-25 Harley-Davidson models with 49 mm fork tubes • Engineered to adsorb every bump in the road giving the rider consistent surface feedback for added confidence and traction • Large 30 mm piston enhances fluid control and provides a smooth, finely tuned response to any road condition • This gives the rider a comfortable, controlled riding experience without compromising stability or responsiveness PART # DESCRIPTION SUG. RETAIL 0414-0776 For 23-25 FLTRXSE $1,299.99 AXEO 47 PERFORMANCE FRONT SUSPENSION • Fully Customizable Suspension, engineered for riders who demand control; easily dial in suspension settings to match your exact riding style and conditions • Split Function Cartridge Design: The right fork controls the compression damping and the left fork controls the rebound damping, allowing you to fine-tune each function independently for ultimate precision • Tool-free compression and rebound adjustments • External preload adjuster enables easy tuning for different rider weights with included adjustment tool • Performance spring rate delivers agile handling for aggressive riders without sacrificing comfort • Improves cornering clearance and minimizes dragging floorboards • Improves ride quality, straight-line stability, highspeed cornering, and maneuverability • Cartridges will have precise fitment to match the fork tube length • Must be used with stock or aftermarket 49 mm fork tubes; sold separately • Made in the U.S.A. 0414-0778 • Increases resistance to bottoming out on large bumps or potholes • Reduces front-end dive and improves front tire traction under aggressive braking • Designed for optimum performance with all Legend’s rear suspensions • Includes two mono-tube, dual-chambered damper cartridges and preload adjustment tool • Specifically designed to retain factory ride height on FL touring models • Designed to be used with stock diameter front wheels • Available only in standard length • Made in the U.S.A. NOTE: This product is NOT designed for use with 21” and 23” wheels. NOTE: Does not fit 2018-2022 FLTRXSE CVO Road Glide (See PART #0414-0544).

DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS. dragspecialties.com 9901-3565 NOVEMBER 2025 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES PART # DESCRIPTION SUG. RETAIL 2030-2463 For 18-25 FLHC/FXLRS/FXLRST/FXRST, 18-20 FXLR, 86-17 FLST, 91-17 FXD, 84-11 XL w/ 3-bolt license plate support bracket OEM #s 59984-73, 59986-75 $59.95 ULTRA LITE LOW PROFILE LICENSE PLATE MOUNT • Ultra low profile meticulously engineered to sit close to the fender for a discrete, streamlined appearance • Lightweight construction aluminum main plate and high-impact plastic spacer; ideal for high performance builds • Smooth and refined with a brushed aluminum finish • Specifically designed for aftermarket rear carbon fiber fenders to prevent damage but compatible with other fender types • Seamless integration with Custom Dynamics Illuminated 12 radius license plate frames (sold separately) • Includes custom rubber mount pads to protect and reinforce mounting points, and stainless steel allen bolts and Nyloc nuts for secure installation NOTE: Can be used in custom applications but will require drilling holes. DESCRIPTION BLUE GOLD RED SUG. RETAIL 21” x 5.5” 0201-2645 0201-2646 0201-2647 $1,499.95 FORGED BILLET Y-SPOKE FRONT RIMS • All rims are CNC machined from radial forged 6061-T6 aluminum for maximum road durability and strength-to-weight ratio • Features a rolled rim lip for the custom look and detailed CNC machine work from the center of the hub to the edge of the rim • Accept Arlen Ness hub kits (sold separately), which allow full wheels to be assembled in minutes with basic tools • Structurally tested to meet or exceed DOT and JAS international load ratings NOTE: Arlen Ness hub kits must be purchased separately to install (see page 1929 of the 2025 Drag Specialties FatBook). NOTE: Also requires separate purchase of Arlen Ness Fat Tire fork boot covers or Fork Tube guards to install (please see FRAMES & SUSPENSION section in the 2025 Drag Specialties FatBook). SAFETY WARNING: WHEN SELECTING CUSTOM WHEELS,THE TIRES USED FOR YOUR APPLICATION MUST HAVE A LOAD INDEX AND SPEED RATING EQUAL TO OR GREATER THAN THE TIRES FITTED AS ORIGINAL EQUIPMENT. CONSULT MANUFACTURER’S PUBLICATION(S) AND/OR WEBSITE(S) FOR COMPLETE TIRE INFORMATION. 0201-2646 0201-2645 0201-2647

www.dragspecialties.com

Made with FlippingBook

RkJQdWJsaXNoZXIy OTcxOTk3