FEULING® Feuling® is committed to providing the highest quality performance and replacement engine components with unmatched service and technical support. All of their products are engineered to provide the highest levels of performance and reliabilty for your American V-Twin motorcycle. PART # DESCRIPTION SUG. RETAIL 1012-0269 For Feuling® cylinder breathers PART #0930-0239 $39.95 CYLINDER HEAD BREATHER REBUILD KIT • Includes two umbrella valves, two filters, two button head screws and four o-rings • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR ALL 17-24 M-EIGHT MOTORS 0930-0246 0.003” $99.95 PART # DESCRIPTION SUG. RETAIL FOR ALL 17-24 M-EIGHT MOTORS (CONT) 0930-0247 0.005” $99.95 PART # DESCRIPTION SUG. RETAIL FOR ALL 17-24 M-EIGHT MOTORS (CONT) 0930-0248 0.0010” $99.95 ROCKER SHAFT SHIMS • Quiet your engine by tightening the rocker arm to cylinder head end play clearance • Feuling® recommends an ideal side clearance of 0.0035” to 0.005” for optimum rocker arm oil psi and noise reduction • M-Eight cylinder heads also have excessive wear on the rocker arm standoff thrusting surfaces; when the hardened shim is placed on the non thrusting side it will assist in reduction of further wear and damage to cylinder head • Available in 0.003”, 0.005” or 0.0010” thick sizes PART # DESCRIPTION SUG. RETAIL 0929-0090 +0.843” to 0.8435” oversize $299.95 PART # DESCRIPTION SUG. RETAIL 0929-0091 +0.8435” to 0.844” oversize $299.95 RACE SERIES® SOLID LIFTERS • Designed for engines with radical valve spring pressures and large lift camshafts • Maintain proper and critical oil flow to top end with metered oiling • Decrease valve float and maintain maximum valve lift • Optimize valvetrain stability at high engine rpm • Increase horsepower and torque output • CNC-machined and precision-ground from hardened steel • Utilize standard pushrod seat height; Feuling® recommends the use of PART #0928-0010 Race Series® adjustable pushrods (sold separately) • Standard size 0.842” to 0.8425” PART #0929-0024 also available separately; see page 803 of the 2025 Drag Specialties FatBook • Recommended for both strip and high-performance street engines FOR 17-24 M-EIGHT, 99-17 TWIN CAM, 00-22 XL/XR1200 (EXCEPT RH SPORTSTER), 00-09 BUELL • Sold in a set of four • Made in the U.S.A. NOTE: High volume oil pump recommended. NOTE: Requires removal of rocker covers and rocker arm supports for installation. 0929-0091 • Sold as a 24-pack • Made in the U.S.A. NOTE: These shims should be installed by a professional; one who can make correct end play measurements and can install and tighten rocker shaft nuts/bolts without damaging shims. 0930-0247 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 13 MARCH 2025 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
RkJQdWJsaXNoZXIy OTcxOTk3