PART # DESCRIPTION EMIS* SUG. RETAIL FOR 17-23 FLHT/FLHTK/FLHR/FLHX/FLTRX/FLTRU/FLTRK 1800-2687 Brushed stainless steel 2 $1,699.95 1800-2689 Guardian Black 2 1,699.95 PART # DESCRIPTION EMIS* SUG. RETAIL FOR 18-24 FXBB/FXBBS, FXLR/FXLRS, FXFB/FXFBS, FLSL AND FLHC/FLHCS 1800-2682 Brushed stainless steel 2 $1,699.95 1800-2683 Guardian Black 2 1,699.95 QUALIFIER 2-INTO-1 EXHAUST SYSTEMS • Full stainless steel construction • Computer-aided stepped header design to maximize power output • Precision bends allow for class-leading ground clearance • Full-length heat shields on front and rear header pipes • Race-inspired S&S end cap • Sound reducer dB insert included • Oxygen sensor ports allow use of wide band or stock O2 sensors • Made in the U.S.A. NOTE: Qualified Manufacturer Declared 49-state Federal Emissions Compliant catalyst exhaust system. PART # DESCRIPTION EMIS* SUG. RETAIL 1800-2690 For 20-24 FXLRS, 18-24 FXBB/FXBBS, 18-23 FXFB/FXFBS 3 $1,549.95 2-INTO-1 EXHAUST SYSTEM WITH SUPER BIKER MUFFLER • Stepped 13/ 4” to 17/ 8” stainless steel headpipes • 4” muffler body with tapered end cap • Features TIG welding, 18mm O2 bungs and 12mm adapters • Partial heat shield covers the rear cylinder headpipe • Brushed stainless steel finish • Made in the U.S.A. 1800-2687 1800-2683 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES,INCLUDING CALIFORNIA.PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE“COMPETITION USE”ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES dragspecialties.com June 2024
PART # DESCRIPTION EMIS* SUG. RETAIL 1800-2674 For 14-22 XL (except RH Sportster) 2 $1,449.99 UPSWEEP 2-INTO-1 PCX™ EXHAUST SYSTEM • PCX™ (Power Chamber Exhaust) Technology • Chambered high-flow catalyst cartridge designed to increase torque • Lightweight, high-grade 304 stainless steel construction • Matte black finish • Hand TIG welded • Mounting and hardware instructions included • Sold each • Made in the U.S.A. NOTE: 49-State emission compliant. PART # DESCRIPTION EMIS* SUG. RETAIL 1020-4200 For 21-23 RA1250/1250S 2 $459.99 FP4 • Made of polycarbonate plastic/Bluetooth® low energy, FP4 hardware smaller and thinner than the previous generation electronics product • Unit’s LEDs have been simplified so the rider knows exactly what is happening between the FP4 and the rider’s motorcycle • Built from the ground up, Android and iPhone® apps feature a new rider interface and are easier to navigate and use than ever before • Live Data in the FP4 app has been upgraded with a whole new look and an additional gauge to track more crucial data while riding • All necessary hardware and Instructions included • Made in the U.S.A. NOTE: 49-State emission compliant. 2 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE 2310-0846 13.5” dark smoke $274.95 2310-0847 13.5” tint 274.95 PRO TOURING FLARE™ WINDSHIELDS • The Pro Touring Flare™ is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town • The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) • The “flip” at the top of the Flare™ kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger • Wind tunnel tested and designed for maximum performance and air management • Made of Lexan® Polycarbonate with FMR hard coating on both sides of the shield for unmatched durability • All are predrilled for easy mounting using stock windshield hardware PART # DESCRIPTION SUG. RETAIL 2330-0327 For all FXRP, FXRT, FXRD fairings $79.95 FAIRING HEADLIGHT COVER • Ideal for riders seeking to enhance their motorcycles appearance and performance • Designed with the perfect blend of style, protection, and functionality • The clear lens of the headlight cover maximizes light output • Allows improved visibility during nighttime rides • Includes headlight cover, trim and hardware • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 4405-0937 75 watts x 4 channels at 2 ohms, 300 watts total $349.99 4405-0938 One channel subwoofer amp, 500 watts at 1 ohm, 300 watts at 2 ohm 319.99 KPX AMPLIFIERS • Specially designed to deliver tremendous power in a true, tiny, weather-resistant footprint without overtaxing your system • Purpose-built to perform on your motorcycle or anywhere space is compromised • Flexible, built-in crossovers allow you to craft your sound with precision while ensuring long speaker life • Accepts signals as low as 125 millivolts and as high as 40 volts • Measures 8.5” W x 3.3” H x 2.5” L PART # DESCRIPTION SUG. RETAIL 4405-0930 2 ohm $199.99 4405-0931 4 ohm 199.99 6.5” COAXIAL SPEAKERS • Designed specifically to sound good and last through every kind of weather • Weatherproof design features titanium tweeters and neodymium magnets • Tough construction stands up to the elements while delivering a clean, crisp sound • Recommended for use with 60 watts of power • Weighs 15.2 oz. per speaker • Sold in pairs • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0846 2310-0847 4405-0930 4405-0931 4405-0938 4405-0937 PART # DESCRIPTION SUG. RETAIL 4405-0935 2 ohm $199.99 4405-0936 4 ohm 199.99 PS COAXIAL SPEAKERS • Remarkable performance and ultra-clean bass • Heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) • Polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability • Weatherproof • Speaker measures 5” x 7” with a 3/ 4” tweeter and comes in 2 or 4 ohm options • Sold in pairs 4405-0935 4405-0936 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 3 JUNE 2024 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
SADDLEMEN More than just seats! Saddlemen offers stylish, practical and durable sissy bags and saddlebag liners to make packing your bike for longer rides easy. And their line of fuel tank covers helps prevent scratches to the bike’s tank and gives at-home mechanics or shop technicians a convenient place to place tools during service work. PART # DESCRIPTION SUG. RETAIL 3515-0239 Fundamentals sissy bar bag $75.00 FUNDAMENTALS SISSY BAR BAG • Conveniently mounts onto your sissybar pad bracket • Two zipped pockets (one expandable) • Integrated MOLLE modular attachment points for storage customization • All strap ends include our unique Keepers system which eliminates the need for cutting after the bag is installed • Constructed with UV-, water- and weatherresistant 600 x 600 D polyester • Measures 7” L x 5” W (expanded) x 71/ 2” H PART # DESCRIPTION SUG. RETAIL 3501-2027 DXT saddlebag liners $55.00 DXT SADDLEBAG LINERS • Attractively styled liners built to fit perfectly inside your DXT saddlebags • Expandable to match your saddlebag configuration • Wire-reinforced decorative edging provides liner rigidity • Water resistant to provide additional protection against the elements • Rugged 600-denier SaddleTuff construction with zipper closures • Convenient carrying handles • Measure 22.5” L x 14” H x 6” D (non-expanded) • Sold as pair PART # DESCRIPTION SUG. RETAIL 0701-1000 Small $60.00 0701-0999 Large 60.00 FUEL TANK COVERS • Protect your tank in style while servicing or storing your motorcycle • Saddlemen Race Development inspired graphic • Soft inner prevents scratches • Built-in handlebar storage loops and tool pouches • Zippered hardware storage pouch • Available in small for “peanut” tanks and large for full-size tanks 0701-0999 0701-1000 4 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL FOR 23-24 FLHXSE/FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE (151/ 2” W DRIVER’S SEAT AREA) 0801-1674 W/ gray stitching $770.00 0801-1675 W/ black stitching 760.00 PART # DESCRIPTION SUG. RETAIL OPTIONAL PASSENGER SEATS (12” W PASSENGER SEAT AREA) 0801-1676 W/ black stitching $365.00 0801-1677 W/ gray stitching 375.00 DELUXE TOURING SOLO SEATS WITH BACKREST • Seat pattern features black stitching and an eye-catching carbon fiber inlay • Driver’s backrest is fully adjustable and removable • Bucket-style saddle positions the rider comfortably in the seat for a more controlled ride • Mustang’s own proprietary controlled-density foam formula requires no breakin and retains it’s shape and support for years of durable, reliable comfort PART # DESCRIPTION SUG. RETAIL 0801-1669 For 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB, 22 FXRST $619.00 PART # DESCRIPTION SUG. RETAIL 0807-0226 Small pillion (11” L x 9” W) $79.95 0807-0227 Small (18” L x 12” W) 89.95 0807-0228 Medium (14” L x 14” W) 89.95 AIRHAWK SEAT PADS • Unique inflatable, multiple-cell design for the ultimate in comfortable seating and vibration absorption • Made from polyurethane and features a breathable, stretchable outer cover and a nonskid urethane base to protect your seat • Features open-mesh side panel to allow air circulation through individual air cells, creating extra ventilation to reduce heat buildup • Shape Fitting Technology eliminates painful pressure points and promotes consistent blood flow for a longer, more comfortable ride • Automatically adjusts to the shape of the rider • Raises ride-height only slightly • Securely fastens via double strap system running under seat or pillion • Will not scratch or disfigure existing seat or pillion • Valve for inflation, adjustment and deflation • Made in the U.S.A. 0807-0226 0807-0227 0807-0228 • Marine-grade fiberglass seat baseplate with polyurethane seat bumpers to absorb vibration • High-quality expanded vinyl seat cover has the appearance of leather but is more durable to withstand the elements • Optional matching passenger seats available (sold separately) • Made in the U.S.A. 0801-1677 0801-1674 0801-1675 shown with optional passenger seat 0801-1676 FRED KODLIN SIGNATURE SERIES SQUAREBACK™ SEAT • Designed by Fred and Len Kodlin, Europe’s famous father/son custom bike-building team • Features contrasting-color, reverse apex chevron pattern on perforated vinyl • Split-panel, gripper vinyl cover for stability and performance • Riders are positioned slightly further back compared to stock • High-rising wall allows the rider increased lower back support • Driver’s seat area measures 111/ 2” W • Carefully curated 7” wide tail section provides a stylish look and ample comfort for 2-up riding • Mustang’s proprietary controlled-density foam formula requires no break-in and retains shape and support after years of use • Marine-grade fiberglass baseplate for long lasting support and durability • Polyurethane bumpers to absorb vibration DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 5 JUNE 2024 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL 0802-1545 For 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB $663.00 MAVERICK DADDY LONG LEGS SEAT • With a combination of touring comfort and finely tailored styling, the Maverick is really two seats in one • Comfort that retains a reasonably low and sporty profile • Perfectly contoured shape • The Maverick will cradle you without restricting movement • Moves rider 2” back from standard Maverick • 6.75” of back support 14.5” wide seating area • 12” W passenger area • Durable black Biker Tec cover PART # DESCRIPTION SUG. RETAIL FOR 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB 0802-1546 Double diamond seat $571.00 0802-1547 Basket weave seat 548.00 PART # DESCRIPTION SUG. RETAIL FOR 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB (CONT) 0802-1548 Pleated seat $571.00 0802-1549 Double diamond seat w/ chestnut thread 571.00 TAILWHIP UP FRONT SEATS • Takes the Kickflip one step further • If it’s more comfort for the passenger or just another platform to let your adventurous side explore, the whipped-up tail will give you what you are looking for • Molded Marathon Foam • BikerTec custom cover • Driver seating 12.25” W; passenger seating 7” W • Up Front design moves the driver 2” closer to the front of the bike and easier reach to the handlebars • Stitch seat • Molded Marathon Foam • Baseplate is 16-gauge powdercoated steel • Carpeted seat bottom • Made in the U.S.A. 0802-1547 0802-1548 0802-1549 0802-1546 PART # DESCRIPTION SUG. RETAIL 0802-1542 Double diamond seat $548.00 PART # DESCRIPTION SUG. RETAIL 0802-1543 Basket weave seat $525.00 PART # DESCRIPTION SUG. RETAIL 0802-1544 Pleated seat $548.00 KICKFLIP DADDY LONG LEGS SEATS • This is the seat that every adventurous rider or freestyler would be stoked to own • Maximized back support and ample seating area offer plenty of options for riding – or showing off – at a moment’s notice • Daddy Long Legs moves the rider 2” back from the standard Kickflip • 61/ 2” of back support with wide seating area • Durable black Biker Tec cover • Molded Marathon foam • 16-gauge powder-coated steel seat baseplate with carpeted seat bottom • Made in the U.S.A. • Highly detailed powdercoated steel carpeted base • Made in the U.S.A. 0802-1542 0802-1543 0802-1544 FOR 18-24 FXLR/FXLRS/FXLRST, 18-21 FLSB 6 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL 0801-1501 Smooth, solar-reflective leather $545.95 0801-14991 Smooth, vinyl 487.95 PART # DESCRIPTION SUG. RETAIL 0801-15001 Double diamond, black thread $542.95 1 Not solar-reflective leather. PERFORMANCE PREDATOR 2-UP SEATS WITH BACKREST OPTION • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Advanced clean look with optional EZ Glide II™ backrest capability, sold separately • Optional backrests feature solar-reflective leather cover and multiple detents with virtually no metal-to-metal contact for vertical and fore/aft pad adjustment • Includes all mounting hardware 0801-1501 0801-1499 PART # DESCRIPTION SUG. RETAIL 0711-0241 Oil feed line; for 07-17 Softail (except FXSB); repl. OEM #33525-07 $27.95 0711-0242 Oil return line; for 07-17 Softail (except FXSB); repl. OEM #33531-07 69.95 0711-0243 Oil return line; for 00-06 Softail; repl. OEM #33531-00 71.95 0711-0244 Oil vent line; for 07-17 Softail (except FXSB); repl. OEM #45806-07 58.95 0711-0245 Oil drain elbow; for 00-10 Softail; repl. OEM #63628-00 3.95 CHROME OIL LINE ASSEMBLIES • OEM-style replacement components • Accepts all OEM connectors and retainers • Oil drain elbow is high-quality rubber AUTOTUNE ELECTRONIC FUEL INJECTION CONTROL MODULE KITS • Quickly auto-tune fuel curves for front and rear cylinders on a dyno or on-road with new WEGO IIID dual channel wide-band oxygen sensor interface • Robust alpha-N (throttle position and RPM-based) fuel control eliminates problems with long duration/high overlap camshafts • Extended data logging and diagnostics • Data flash memory stores full 60 minutes of operating data at 10 samples/second • Programmable user input for functions such as two-stage RPM limiter, nitrous retard, and shift kill • Programmable user output for functions such as shift light, nitrous activation, and electric shifter • Powerful Windows software for custom programming and data analysis 0711-0241 0711-0242 0711-0243 0711-0244 0711-0245 FOR 08-23 FLHT/FLHR/FLHX/FLHTC/FLHTCU/FLRT MODELS (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL (113/ 4” W FRONT X 9” W REAR) • Billet aluminum housing with black anodized finish • Fully programmable plug-in replacement • Easy plug-in installation 1020-4215 PART # DESCRIPTION EMIS* SUG. RETAIL FOR STOCK MODELS 1020-4214 For 17-20 FLHR/FLHX/FLHT/FLTR models 3 $1,219.95 1020-4217 For 18-20 Softail models 3 1,219.95 FOR MODELS WITH TRASK TORNADO TURBO KIT (2.5 BAR MAP SENSOR) 1020-42151 For 17-20 FLHR/FLHX/FLHT/FLTR models 3 1,279.95 PART # DESCRIPTION EMIS* SUG. RETAIL FOR MODELS WITH TRASK TORNADO TURBO KIT (2.5 BAR MAP SENSOR) (CONT) 1020-42181 For 18-20 Softail models 3 $1,279.95 FOR MODELS WITH TRASK TORNADO TURBO KIT (3 BAR MAP SENSOR) 1020-4216 For 17-20 FLHR/FLHX/FLHT/FLTR models 3 1,341.95 1020-4219 For 18-20 Softail models 3 1,409.95 1 2.5 Bar MAP Sensor PART # 1020-4221, sold separately. 0801-1500 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 7 JUNE 2024 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL 1131-3945 For 17-23 FLHT/FLHR/FLTR/FLHX models and 18-23 Softail models $300.48 EXTRA PLATE CLUTCH KIT • Adds 11% more surface area to clutch pack • Aramid fiber plates have a higher-density compound • The aramid fiber friction plates provide increased durability • Includes one extra friction and steel plate to add 10% to clutch capacity • Heavy-duty springs are included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1120-0452 Replacement shoe adjuster $46.95 REPLACEMENT SHOE FOR ARMORED ATTITUDE ADJUSTER • Machined from Nylon 66 • Replacement shoe for Armored Attitude primary chain adjuster PART #1120-0437, sold separately • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2120-1332 For 14-23 FLHX, 15-23 FLTRX $99.95 2120-1333 For 99-13 FLHT/FLHR models, 99-09 FLTR models, 06-09 FLHX models (except CVO models) 99.95 2120-1334 For 10-13 FLHX/FLTRX models 99.95 2120-1335 For 09-13 FLTRXSE, FLHXSE 99.95 TOUR-PAK® QUICK-DISCONNECT WIRING HARNESSES • Add power to your Tour-Pak® with quick-disconnect convenience • Plugs into rear fender harness and connects into your Tour-Pak® • Connector is exposed behind seat for easy removal • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2120-1331 For 24 FLHX/FLTRX/FLTRXSTSE, 23 FLHXSE/ FLTRXSE, 21-24 RA1250/1250S (+15”) $89.95 THROTTLE-BY-WIRE EXTENSION HARNESS KIT • Designed and tested to extend your wiring without causing any harm or interference to the motorcycle’s computer when installing taller handlebars • Color coded to connect to the existing Molex connector; simple plug-in installation • Made in the U.S.A. 2120-1332 8 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL FOR 14-23 H-D MODELS EQUIPPED WITH OEM KING TOUR-PAK 2040-2808 Light bar w/ red lens $374.95 PART # DESCRIPTION SUG. RETAIL FOR 14-23 H-D MODELS EQUIPPED WITH OEM KING TOUR-PAK (CONT) 2040-2809 Light bar w/ smoked lens $374.95 PROBEAM® LED KING TOUR PAK RUN/BRAKE/TURN LIGHT BARS • Replaces the factory rear Tour-Pak® light bar • Running light pipes wrap around sides for increased safety • Full-contrast brake light and turn signals • Red or smoked lens with black trim • Antenna compatible • Plug-and-play PART # DESCRIPTION SUG. RETAIL 2040-3193 W/ white LEDs $94.95 PART # DESCRIPTION SUG. RETAIL 2040-3194 W/ yellow LEDs $99.95 LED LIGHT BARS • Feature six high-power LEDs in a die-cast aluminum housing • Mounting bracket is stainless steel • Built-in on/off switch • Include a wiring harness for direct plug-in installation • Light measures approximately 61/ 4” W x 13/ 4” H x 2” D (160mm x 45mm x 55mm) • 12 VDC, 18W, 800 lumens FOR 15-23 FLRTX/FLTRXS/FLTRXST, 16-19 FLTRU, 18-22 FLTRXSE, 20-24 FLTRK, 23-24 FLTRT PROBEAST™ DUAL TONE AIR HORNS • Direct replacement to stock horn • Attention grabbing 104.9dB rating (at 2 meters) • Built with heavy-duty metal bracket and ABS cover for lasting durability • Internals are 100% self-contained • Cover dimensions: 57/ 8” L x 53/ 4” W • Plug-and-play harness 2107-0310 2107-0311 PART # DESCRIPTION SUG. RETAIL 2107-0310 Black $239.95 PART # DESCRIPTION SUG. RETAIL 2107-0311 Chrome $249.95 ELECTROMAGNETIC HORN KIT • Replace the factory horn with 109 dB (at 2 meters) single, low tone electromagnetic MARCO horn • Includes mounting bracket and nut for installation • Plug and play installation with connection to factory wiring 2040-3193 2040-3194 2040-2809 2040-2808 PART # DESCRIPTION SUG. RETAIL 2107-0331 For 18-23 Softails ,11-13 FXS, 13-17 FXSB/FXSE, 14-17 FXDL/FXDLS $44.95 FOR 84-23 FLT/FLHT/FLHR/FLTR/FLHTCUTG/FLRT/FLTRT, 84-17 SOFTAILS (EXCEPT FXSB/FXS/FXCW/FXCWC), AND 91-17 DYNA MODELS (EXCEPT 14-17 FXDL/FXDLS), XL1200C/XL1200T DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 9 JUNE 2024 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
CHROME PART # SUG. RETAIL GLOSS BLACK PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK FOR 24 FLTRX/FLTRXSTSE, 23-24 FLTRXSE (11/ 4” DIAMETER CLAMPING AREA) 0601-6358 $449.95 0601-6359 $449.95 12” 35” 101/ 4” 8” 0601-6360 449.95 0601-6361 449.95 14” 35” 101/ 4” 8” 0601-6362 449.95 0601-6363 449.95 16” 35” 101/ 4” 8” 11/ 4” EZ INSTALL POINTED TOP HANDLEBARS • Revolutionary interlocking bolt-together two-piece handlebar design that takes up half the shelf space, is economical to ship and even faster to install • CNC mandrel-bent from 11/ 4” diameter x .120” wall heavy tube • EZ Install - no more need to fight internal wiring; with our handlebars you can install wiring in minutes • Feature a billet machined top with a large internal machined radius that allows for EZ pulling of wiring (non-welded top corner) • Bars with “squared” lower bends also have additional slots to ease wire routing • Bars are knurled • Made in the U.S.A. NOTE: Accept OEM heated grips. NOTE: U.S. Patent No. 10,946,926. HANDLEBAR WIRING EXTENSION KITS • All the wiring needed when performing a handlebar swap • All kits work with bars with up to an 18” end rise over stock • Assembled in the U.S.A. 0605-0016 0605-0017 0601-6358 0601-6363 PART # DESCRIPTION SUG. RETAIL FOR 24 FLHX/FLTRX, 23-24 FLHXSE/FLTRXSE 0605-0015 Complete replacement handlebar wiring harness (45” L wire lengths) $94.95 0605-0016 Three-piece wiring extension kit to lengthen the OEM handlebar switches and TBW sensor 45.95 FOR 14-23 TOURING (EXCEPT FLHRXS, 23 FLHXSE/FLTRXSE) 0605-0017 Complete replacement handlebar wiring harness (48” L wire lengths) 49.95 10 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL FOR 99-23 FLHT/FLHR/FLHX/FLTR/FLTRU/FLTRK/FLTRX, 09-13 H-D FL TRIKE, 00-17 FLST AND 12-16 FLD 1621-1147 Passenger, black $379.95 1621-1151 Passenger, chrome 409.95 FOR 18-23 SOFTAIL MODELS (W/ FOOTPEGS) 1621-1146 Driver, black 379.95 PART # DESCRIPTION SUG. RETAIL FOR 18-23 SOFTAIL MODELS (W/ FOOTPEGS) (CONT) 1621-1150 Driver, chrome $409.95 FOR 00-17 FXD/FXR/FXST/XL MODELS (UNIVERSAL MALE MOUNT) 1621-1145 Black 379.95 1621-1149 Chrome 409.95 APEX MINI FLOORBOARDS • Billet 6061 aircraft-grade aluminum construction • Floorboards for FXD/FXR/FXST/XL models include a stainless steel clevis • Driver floorboards for M-Eight Softail models include an aluminum clevis • Triple nickel-plated chrome or black anodized finish • Measure 6.5” L x 3.5” W • Made in the U.S.A. NOTE: Models with passenger footpegs will require the use of OEM accessory floorboard mount. PART # DESCRIPTION SUG. RETAIL FOR 18-23 SOFTAIL MODELS W/ MID CONTROLS 1610-0696 Black $274.95 PART # DESCRIPTION SUG. RETAIL FOR 18-23 SOFTAIL MODELS W/ MID CONTROLS (CONT) 1610-0697 Chrome $299.95 BILLET BRAKE ARMS • Increased possible lean angle vs. stock arms • Billet 6061 aluminum construction • Triple nickel-plated chrome or black anodized finish • Integrated durable scrape plate • Compatible with all Thrashin shifter pegs (5/ 16”-24 x 7/ 8” SCHS, sold separately) • Made in the U.S.A. 1621-1151 1621-1145 1610-0697 1610-0696 PART # DESCRIPTION SUG. RETAIL 0632-0983 Throttle tube $59.95 THROTTLE TUBE • Fits 1” OD handlebars • For H-D Throttle-By-Wire models (except 23-24 FLHXSE/ FLTRXSE, 24 FLHX/FLTRX/FLTRXSTSE) • Knurled surface for grip adhesion • Machined from 6061-T6 billet aluminum • Dual low friction PTFE inserts for smooth operation • Sold each PART # DESCRIPTION SUG. RETAIL 0630-3216 Moto grips $24.95 MOTO GRIPS • Slim profile designed with V-Twin motorcycles in mind • Durable proprietary compound • Fully textured diamond grip reduces vibration and provides extra dexterity • Fit most H-D models with 1” handlebars • Available in black • Sold in pairs NOTE: Billet throttle tube not included. DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 11 JUNE 2024 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
TNT-05 SPEEDOMETERS AND MULTI-METER • Eight-color changeable LCD display • Easy to read in all light conditions with backlit design • Speedometer measures speed from 0-100 mph (0-160 km/h) with optional programmable over-speed warning light • Speedometer features all necessary information: odometer, trip meter, thermometer, high temperature warning, fuel meter, low fuel warning, clock, volt meter, and more • D80 multi-meter features digital speedometer (up to 225 mph) and analog tachometer that measures RPM up to 8000 • Available with sleek black bezel • D48 speedometer body measures 23/ 16” in dia. and 2” deep PART # DESCRIPTION SUG. RETAIL FOR H-D MODELS WITH 31/ 2” ON-CENTER RISERS 0602-1461 10” rise $898.99 0602-1462 8” rise 898.99 0602-1463 6” rise 898.99 PART # DESCRIPTION SUG. RETAIL 2210-0670 For stock speedo on 22-23 FXLRS models or Koso H-D 04 speedometer (PART #2211-0172) $199.99 FASTBACK GAUGE BUCKET • Designed for use with Kodlin Fastback riser kits • CNC-machined from billet aluminum • Black anodized finish • 33/ 8” cup 0602-1461 0602-1463 FOR 14-23 FLHX/FLHT/FLTRX/FLTRU/FLTRK/FLHTCUTG/FLTRT (EXCEPT 23 FLHXSE/FLTRXSE) 2210-0665 2212-0901 PART # DESCRIPTION SUG. RETAIL 2210-0666 TNT-05S D60 speedometer $199.95 2210-0667 TNT-05S D48 speedometer 179.95 PART # DESCRIPTION SUG. RETAIL 2210-0669 TNT-05 D80 multi-meter (speedometer/tachometer) $259.95 2210-0669 2210-0666 2210-0667 HD-03 FOUR-PIECE GAUGE KITS • Plug-and-play • Fit directly on OEM dash and connectors • Available with blue LED display or red LED display • Include multifunction speedometer, tachometer, odometer, volt meter, air suspension meter, gear indicator, trip meter, engine temperature, oil temperature and fuel level gauges • Indicator lights for oil, engine warning, warning light, high beam, fog light, voltage, anti-theft, cruise, ABS and turn signals PART # DESCRIPTION SUG. RETAIL 2210-0664 Blue LED display $1,029.95 2210-0665 Red LED display 1,029.95 PART # DESCRIPTION SUG. RETAIL 2212-0901 Optional air suspension pressure sensor $124.95 • Optional air pressure sensor for models equipped with air suspension is available separately NOTE: On CVO models the run/stop switch must be in the ON position to change settings on the display. • D60 speedometer body measures 211/ 16” in dia. and 2” deep • D80 multi-meter body measures 33/ 4” in dia. and 23/ 4 “ deep FASTBACK RISER KITS WITH GAUGE BUCKET • CNC-machined from billet aluminum • Black anodized finish • Available in 6”, 8” and 10” height • 1” bar clamp size • Stainless hardware and zip ties included NOTE: Fits 22-23 FXLRS models and H-D models using the FXLRS round gauge or Koso H-D 04 speedo (PART #2211-0172). 12 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
CARBON FIBER FAT WRAPPER FRONT FENDER • Wrapper full length custom front fender for 21” wide/fat tire FLT Touring models • Features specially notched sides and smooth flowing body lines for contoured curves seen from every angle • 8” wide front fender designed to fit 21” x 5.5” front wheels with 180mm tires • Allows clearance for up to 14” oversized brake rotors • Pair with Arlen Ness smooth style fork boots for 21” wide tire applications for direct bolt-on installation; sold separately on pages 1727-1728 of the 2024 Drag Specialties FatBook NOTE: Always mount fender to check clearances prior to custom paint or road testing. PART # DESCRIPTION SUG. RETAIL 1401-1053 For 14-23 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK/H-D FL Trike, 24 FLHRXS/FLHTK/FLTRK (except 23-24 FLHXSE/FLTRXSE and 24 FLHX/FLTRX/FLTRXSTSE) $349.95 1401-1054 For 99-13 FLHT/FLHX/FLHR/FLTR/H-D FL Trike models 349.95 CARBON FIBER CAFE FRONT FENDERS • Made from OEM quality tooling and the highest quality carbon composite materials available • Each fender features a matching custom window design and direct bolt-on fitment that does not require additional brackets • Available in a polished high-gloss finish that is engineered and tested for UV resistance • Engineered to allow clearance for up to 14” oversized brake rotors • 5.5” wide front fenders designed for use with 130/60-19” front tires • Will work with conventional style factory and most all aftermarket fork legs PART # DESCRIPTION SUG. RETAIL FOR 08-23 FLHT/FLHR/FLTR/FLHX, H-D FL TRIKE, 16-23 SOFTAILS, 20-23 ELW, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS (EXCEPT MODELS W/ AIR-ASSISTED FORKS AND 23 FLHXSE/FLTRXSE) 0630-3211 Gold anodized $99.95 0630-3212 Red anodized 99.95 FOR 82-17 BIG TWIN AND 82-22 XL MODELS (EXCEPT 08-17 DRESSERS, H-D FL TRIKE, 16-17 SOFTAILS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE, 16-17 FXDLS, RH SPORTSTER AND MODELS W/ AIR-ASSISTED FORKS) 0630-3209 Gold anodized 99.95 0630-3210 Red anodized 99.95 DIAMOND GRIPS • Diamond design rubber grips with integrated knurling inside each diamond shaped pocket for a vintage look with excellent hand traction • Premium rubber grip feels soft and comfortable in all riding scenarios • CNC-machined billet end cap • Arlen Ness laser logo on each end cap • New internal design installs like factory grips; no glue required for installation • Sold in pairs 0630-3211 0630-3210 1401-1053 PART # DESCRIPTION SUG. RETAIL 1401-1055 For 14-23 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK/H-D FL Trike, 24 FLHRXS/FLHTK/FLTRK (except 23-24 FLHXSE/FLTRXSE and 24 FLHX/FLTRX/FLTRXSTSE) $549.95 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 13 JUNE 2024 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
PART # DESCRIPTION SUG. RETAIL FOR 14-23 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE (EXCEPT 23 FLHXSE/FLTRXSE) 1401-1024 For 16”-19” wheels, w/ black adapters $379.95 1401-1025 For 16”-19” wheels, w/ chrome adapters 379.95 1401-1026 For 21” wheels, w/ chrome adapters 379.95 1401-1027 For 23” wheels, w/ black adapters 397.95 1401-1028 For 23” wheels, w/ chrome adapters 397.95 DEI FRONT FENDERS • Complete redesign of the classic Yaffe fender • Available for 16”-19” OEM front wheels, custom 21” and 23” front wheels • Front and rear of fenders have been lengthened and the sidewalls thickened • 14-gauge steel construction, made from one solid piece (no welds) • Pre-drilled for installation • E-coated finish • Chrome or black fender adapters included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2020-2180 Black $348.95 PART # DESCRIPTION SUG. RETAIL 2020-2181 Chrome $348.95 PART # DESCRIPTION SUG. RETAIL 2020-2182 Satin $348.95 QUAD POD LIGHTING KITS • Super small, laser-bright Lightning Bolt LED lights • Designed to mesh perfectly with Sharknado® fairings and headlamps • Dual function as turn signals and daytime running lights • Easy wiring, no load equalizers required • Each pod includes four Lightning Bolt lights and billet aluminum Quad Pod frame in black, chrome or satin finish • Sold in pairs 2020-2182 2020-2181 2020-2180 1401-1028 1401-1027 1401-1025 1401-1026 1401-1024 14 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
SLYFOX The SLYFOX mission is simple: make it lighter, make it stronger, make it FASTER. The brand was developed through a lifetime of growing up in a family of racers, engineers and powersports leaders. SLYFOX uses only the finest materials and manufacturing processes to make high-performance products for your American V-Twin motorcycle. PART # DESCRIPTION SUG. RETAIL 1621-1152 Black anodized $375.00 PART # DESCRIPTION SUG. RETAIL 1621-1153 Polished $370.00 DRIVER FLOORBOARDS • Full-size floorboards for comfort without sacrificing ground clearance • Billet aluminum construction with a diamond cut finish • Carbon fiber inserts covered with a TPU film protection for durability and a lasting finish • Dimensions: 14” L x 5” W • Sold in pairs 1621-1153 1621-1152 1621-1152 PART # DESCRIPTION SUG. RETAIL FOR 80-23 FLT/FLHT/FLHR/FLHX/FLTR/FLTRX/FLTRU/FLTRK, 09-13 H-D FL TRIKE, 86-17 FLST/F/N AND 12-16 FLD 1621-1154 Black anodized $275.00 1621-1155 Polished 270.00 FOR 18-23 FLDE/FLFB/FLFBS/FLHC/FLHCS/FLSL 1621-1156 Black anodized 270.00 1621-1157 Polished 270.00 MINI DRIVER FLOORBOARDS • Billet aluminum construction with a diamond cut finish • Stainless steel mounting clevis • Carbon fiber inserts covered with TPU film protection for durability and a lasting finish PART # DESCRIPTION SUG. RETAIL M-EIGHT SOFTAIL/ELW/PAN AMERICA (DRIVER) 1620-2531 Black anodized $150.00 1620-2532 Polished 145.00 M-EIGHT SOFTAIL/ELW/PAN AMERICAN (PASSENGER) 1620-2533 Black anodized 150.00 1620-2534 Polished 145.00 FOOTPEGS • Billet aluminum construction with a diamond cut • Stainless steel mounting clevis • Carbon fiber insert covered with TPU film protection for durability and a lasting finish • Sold in pairs • See page 1872 of the 2024 Drag Specialties FatBook for an explanation of footpeg mount styles PART # DESCRIPTION SUG. RETAIL FOR 21-23 FLHT/FLHR/FLHX/FLTR/FLHTRCUTG/FLRT/FLTRT (EXCEPT 23 FLHXSE/FLTRXSE) 0610-2296 Black $160.00 0610-2298 Chrome 165.00 PART # DESCRIPTION SUG. RETAIL FOR 17-20 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLTRK, 19-20 FLHTCUTG/FLRT 0610-2294 Black $150.00 0610-2295 Chrome 155.00 BRAKE/CLUTCH LEVER SETS • Black levers feature black anodized finish with white Slyfox logo and laser engraving • Chrome logos feature Slyfox logo • 6061 aluminum construction • Sold in pairs FOR 80-23 FLT/FLHT/FLHR/FLHX/FLTR/FLTRU/FLTRK/FLTRX, 99-13 H-D FL TRIKES, 86-17 FLST/F/N AND 12-16 FLD • Dimensions: 73/ 4” L x 3” W • Sold in pairs 1621-1154 1621-1157 0610-2296 0610-2295 1620-2533 1620-2532 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 15 JUNE 2024 dragspecialties.com DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES
COASTAL MOTO Precision-cast wheels and custom brake rotors that add real style to your ride. Since 2008, Coastal Moto has been leading the way in custom wheels for American V-Twins. They were the first to develop a full 3D, one-piece wheel with an integrated hub. They continue to set the industry standard in design, engineering and manufacture. PART # DESCRIPTION SUG. RETAIL FOR 14-23 FLHT/FLHX/FLTRX/FLTRU, 14-19 FLHTK, 20-24 FLHRXS, 17-19 FLHR (W/ 6.7” BOLT CIRCLE, FIVE LUG MOUNT) 1710-4591 Stainless $199.95 1710-4592 Polished stainless 199.95 CUSTOM 11.8” FRONT BRAKE ROTORS • Rotors have an 11.8” (300mm) diameter • Drilled for better heat dissipation and consistent braking in wet weather • Designed for use with OEM and most aftermarket calipers • Can be used in either right or left side applications • Mounting buttons and screws are included • Sold each PART # DESCRIPTION SUG. RETAIL FOR 00-07 FLHT/FLHR/FLHX CUSTOM WHEEL APPLICATIONS W/ FIVE-LUG MOUNTED ROTORS 1710-4589 Stainless $199.95 1710-4590 Polished stainless 199.95 CUSTOM 11.5” FRONT BRAKE ROTORS • Drilled for better heat dissipation and consistent braking in wet weather • Designed for use with OEM and most aftermarket calipers • Can be used in either right or left side applications • Mounting buttons and screws are included • Sold each NOTE: Requires brake caliper mounts compatible with 11.5” diameter brake rotors. PRECISION-CAST 3D REAR WHEELS • ”Cast” one-piece design wheels at a fraction of the cost of billet or forged wheels • Solid black finish • Includes bearings and valve stems installed by Coastal Moto • Rear wheel hub accepts stock cush-drive, pulley and brake rotor • Available for ABS and non-ABS models • ABS style features intelligent ABS bearings that are “linked-brake ready”; no ABS system reprogramming required • Compatible with TPMS Largo solid black Hurricane solid black 1710-4589 1710-4592 DESCRIPTION LARGO SUG. RETAIL HURRICANE SUG. RETAIL 18” x 5.5” for 09-23 FLHT/F LHR/FLHX/FLTRX/FLTRU/FLTRK w/ ABS 0202-2223 $999.95 0202-2225 $999.95 18” x 5.5” for 09-19 FLHT/FLHR/FLHX/FLTRX w/o ABS 0202-2224 999.95 0202-2226 999.95 16 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS dragspecialties.com JUNE 2024 DRAG FATBOOK • DRAG OLDBOOK • PARTS & ACCESSORIES FOR INDIAN MOTORCYCLES 9901-3435
www.dragspecialties.comRkJQdWJsaXNoZXIy OTcxOTk3