PART # DESCRIPTION SUG. RETAIL FOR 09-23 FLHTCUTG, 10-11 FLHXXX, 20-22 FLHTCUTGSE 1401-0972 Left side $759.95 1401-0973 Right side 759.95 PART # DESCRIPTION SUG. RETAIL FOR 15-23 FLRT/FLTRT 1401-0974 Left side $759.95 1401-0975 Right side 759.95 SWOOP REAR TRIKE FENDERS • Mid-century custom stretched styling • 3-D molded from the highest quality composite material • Direct, bolt-on design with all necessary hardware • Fits wheel sizes from stock (16”) to 20” x 8” • Raw finish, ready for paint • Sold each • Made in the U.S.A. NOTE: Do not accept factory taillights. PART # DESCRIPTION SUG. RETAIL 1401-0971 For 18-23 FXLR/FXLRS/FXLRST $449.95 “THE FIX” CUSTOM REAR FENDER KIT • Super-clean, custom “fix” for that ugly factory tail section • Frenched-in black license plate bracket with LED lights • Integrated Lightning Bolt taillights • 3-D molded composite material • Bolt-on installation with factory hardware • Raw finish, ready for paint • Made in the U.S.A. NOTE: May fit FXDF models if equipped with OEM rear fender brackets for FXLR. PART # DESCRIPTION SUG. RETAIL 1401-0977 For 20-23 FXLRS/FXLRST $445.95 THICKY SUPER-LITE COMPOSITE FRONT FENDER W/ BLACK DEBRIS GUARDS • Redesigned, now features a lengthened front and rear, squared ends and thicker sidewalls • Super-Lite fender is composed of 3-D molded, hand-laid composite material • Added surface area allows for more elaborate custom paint designs • E-coated finish • Pre-drilled for installation • Made in the U.S.A. NOTE: Fender is intended for use with OEM tire size (110/90-B19) only. PART # DESCRIPTION SUG. RETAIL 1401-0976 For 20-23 FXLRS/FXLRST $445.95 SUPER-LITE SPORT FRONT FENDER KIT • Lightweight, performance-oriented composite material • Custom design fits 19” stock wheel to perfection • Kit comes complete with mounting hardware and two steel debris guards with durable black powdercoated finish • Made to match with black Black Stash Chin Spoiler (PART #0504-0429) • Raw finish, ready for paint • Made in the U.S.A. 1401-0972 1401-0975 THE DRAG SPECIALTIES JANUARY 2024 dragspecialties.com
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 2 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES PART # DESCRIPTION SUG. RETAIL FOR 06-09 DYNA MODELS 1800-2634 Chrome $749.99 1800-2635 Matte black 799.99 BIG RADIUS 2-INTO-2 EXHAUST SYSTEMS* • Big 21/ 2” full header and muffler heat shield system is virtually blue-proof • 18mm O2 sensor ports • Chrome finish pipes feature scalloped tips for a unique look • Removable baffles and mounting hardware included • Made in the U.S.A. 1800-2635 1800-2634 PART # DESCRIPTION SUG. RETAIL FOR 86-09 FXS/FXST/FLS/FLST MODELS (EXCEPT 08-09 FXCW/C, 09 FXSTSSE) 1800-2632 Chrome $749.99 1800-2633 Black 799.99 BIG RADIUS 2-INTO-2 EXHAUST SYSTEMS* • Big 21/ 2” full header and muffler heat shield system is virtually blue-proof • Chrome pipes feature scalloped tips for a unique look • Black pipes are all slash-cut and feature heat shields coated with a race-quality black ceramic contrasted with a signature chrome badge and tips • Include removable baffles and mounting hardware • 18mm O2 sensor bungs • Made in the U.S.A. 1800-2632 1800-2633 PART # DESCRIPTION SUG. RETAIL 1800-2636 For 07-09 FLHT/FLHR/FLHX/FLTR $749.99 BIG RADIUS 2-INTO-2 EXHAUST SYSTEM* • Big 21/ 2” full header and muffler heat shield system is virtually blue-proof • Chrome finish • 18mm O2 sensor bungs • Chrome pipes feature scalloped tips for a unique look • Removable baffles and mounting hardware included • Made in the U.S.A.
JANUARY 2024 THE DRAG SPECIALTIES 3 dragspecialties.com HOPPE Award-winning motorcycle fairing designs - Hoppe knows V-Twin motorcycles! They offer a selection of fairings that have the latest Bluetooth® and touchscreen technology. These fairings come fully assembled, ready for installation. They can be painted or customized for a true unique look. PART # DESCRIPTION SUG. RETAIL FOR 15-23 FLRT 2330-0292 5566, two 5” speakers and two 6” speakers $1,999.95 2330-0293 6 x 9, two 6” x 9” speakers 1,999.95 2330-0291 Quadzilla, four 5” speakers 1,999.95 TOUCHSCREEN FAIRINGS • Superb wind protection and updated classic styling similar to 14 and newer H-D batwing fairings • OEM-quality injection molded plastic inner and outer fairing • Plastic is UV stable; won’t become brittle or fade in the sun like ABS plastic • Polished outer fairing for easy paint application • Lightly textured inner fairing for OEM look and feel; can be painted for custom application • Comes with waterproof 6.75” touchscreen including AM/FM radio, Bluetooth® wireless audio and handsfree phone, and is compatible with Apple Car Play and Android Auto (USB only) • Stereo output is 320 watts (80W x 4) • Unit includes front, rear and sub pre-amp outputs for easy upgrading • Includes USB and AUX inputs • Comes fully assembled with speakers (see chart for specific applications) • Concealed internal antenna for a clean look • Includes a 12” clear windshield; will accept any 14 and newer H-D batwing OEM or aftermarket windshield, windshield or vent trim or wind deflectors • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 15-23 FLRT 2330-0278 5566 w/ black hand controls, two 5” speakers and two 6” speakers $1,899.95 2330-0279 Rodzilla w/ black hand controls, four 5” speakers 1,899.95 MEDIA CENTER FAIRINGS • Superb wind protection with updated classic styling similar to 14 and newer H-D batwing models • Fairings are made from OEM-quality injection molded plastic • Plastic is UV stable; won’t become brittle or fade in the sun like ABS plastic • Polished outer fairing for easy paint application • Lightly textured inner fairing for OEM look and feel; can be painted for custom application • Head unit is a waterproof AM/FM radio with Bluetooth® wireless audio and handsfree phone • Unit comes with a pre-amp output for easy upgrading, as well as a USB/AUX input • Stereo output is 160 watts (40W x 4) • Comes with hand controls • Concealed internal antenna for a clean look • Comes fully assembled • Includes brackets to mount to forks at OEM windshield docking points • Includes a 12” clear windshield; will accept any 14-23 H-D batwing OEM or aftermarket windshield, windshield and vent trim or wind deflectors • Made in U.S.A. 2330-0279 2330-0278 2330-0293 2330-0292 2330-0291
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 4 KLOCK WERKS The patented Flare™ windshield now comes in a bold, bright Kolor Sport style to add even more custom style to your ride. The Kolor Sport Flare windshields feature the industry standard for style and effective wind management for your V-Twin motorcycle. Available now for M-Eight Touring models. KOLOR FLARE™ WINDSHIELDS • Designed and wind tunnel tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields • Windshields are made from acrylic • All are predrilled for easy mounting using stock windshield hardware • Made in the U.S.A. The Klock Werks Flare™ Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION SUG. RETAIL 2310-0781 6” orange $199.95 2310-0782 6” yellow 199.95 2310-0783 6” red 199.95 2310-0784 6” green 199.95 2310-0785 6” blue 199.95 2310-0786 6” purple 199.95 2310-0787 6” bronze 199.95 PART # DESCRIPTION SUG. RETAIL 2310-0788 9” orange $249.95 2310-0789 9” yellow 249.95 2310-0790 9” red 249.95 2310-0791 9” green 249.95 2310-0792 9” blue 249.95 2310-0793 9” purple 249.95 2310-0794 9” bronze 249.95 FOR 15-23 FLTRX/FLTRXS/FLTRXST/FLTRK/FLTRU/FLTRUSE MODELS (EXCEPT 23 FLTRXSE) 2310-0783 2310-0785 2310-0787 2310-0781 2310-0791 2310-0789 2310-0793
JANUARY 2024 THE DRAG SPECIALTIES 5 dragspecialties.com PART # DESCRIPTION SUG. RETAIL 4401-0280 JHD962BT stereo $371.00 JHD962BT MINI HEAVY DUTY BLUETOOTH® STEREO • 50 W max power (25 W x 2); 20 W RMS (10 W x 2) • Water and UV resistant front panel • Bluetooth® streaming audio and hands-free calling compatible with JMICHFP and JMICHFP2 microphones (sold separately) • 2-wire power with non-volatile clock and memory support • Can be turned on with a remote • DAB+ (Digital Audio Broadcasting) capability • Includes low battery alert and work timer • 1 rear USB port for device charging • Weatherband • RBDS (Radio Broadcast Data Service) with PTY search PART # DESCRIPTION SUG. RETAIL 4401-0278 JHD62B stereo $340.00 JHD62B HEAVY DUTY BLUETOOTH® STEREO • 180 W max power (45 W x 4); 100 watts RMS (25 W x 4) • Water and UV resistant front panel • 2-wire power includes non-volatile clock and memory support • Toggle switches between night and day display • Can be turned on with remote • DAB+ (Digital Audio Broadcasting) capability • Includes low battery alert and work timer • 1 rear USB port for device charging • Weatherband • RBDS (Radio Broadcast Data Service) with PTY search • Amplified remote trigger (12VDC) • Full dot matrix LDC • App control ready • Stereo pre-amp line level output • Hand-free calling (HFP) • Audio settings (volume/bass/treble/balance/fade) • J1939 CANBus capability NOTE: J1939 CANBus capability requires customer-specific interface. NOTE: Compatible with JMICHFP & JMICHFP2 microphones, which are sold separately. PART # DESCRIPTION SUG. RETAIL 4401-0277 JHD22B stereo $285.00 JHD22B HEAVY DUTY BLUETOOTH® STEREO • 180 W max power (45 W x 4); 100 W RMS (25 W x 4) • Water and UV resistant front panel • 2-wire power includes non-volatile clock and memory support • Toggle switches between night and day display • Bluetooth® streaming audio • Includes low battery alert and work timer • Daylight-readable, segmented LCD • PA microphone input • Amplified remote trigger • Weatherband • Work timer • Audio settings (volume/bass/treble/balance/fade) • AM/FM tuner with 30 presets included • 1 rear USB port for device charging PART # DESCRIPTION SUG. RETAIL 4401-0279 JHD922BT mini stereo $284.00 JHD922BT MINI BLUETOOTH® STEREO • 180 W max power (45 W x 4); 100 watts RMS (25 W x 4) • Bluetooth® streaming audio • Weatherband • AM/FM tuner with 30 presets included • Audio settings (volume/bass/treble/balance/fade) • Toggle switches between night and day display • Daylight-readable, segmented LCD • Low battery alert and work timer • 2-wire power includes non-volatile clock and memory support • Stereo pre-amp line level output (2V RMS) • Toggle switches between night and day display • Amplified remote trigger (12VDC)
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 6 PART # DESCRIPTION SUG. RETAIL 3501-2001 For 86-22 XL (except RH Sportsters) $119.99 BLACKJACK SWINGARM BAG • Durable bag construction using high-quality synthetic black leather with black buckle • Easily mountable with 3 leather mounting straps that slide into mounting slots for simple, secure installation; designed to be mounted on left side of motorcycle • Magnetic closure for extra security • 10.5” L x 11.5” W x 4.5” H PART # DESCRIPTION SUG. RETAIL 3501-2002 For 86-22 XL (except RH Sportsters) $119.99 BLACKJACK SWINGARM BAG 4.0 • A blacked-out, compact left side solo bag made specifically for XL models • Made up of a all-black synthetic leather that is UV-protective and water-resistant • Plastic backing and interior support ensure durability after repeated use • Incudes all mounting straps for simple, secure installation • Possesses a 4.0 liter holding capacity • 13.5” L x 11.5” W x 5.75” H PART # DESCRIPTION SUG. RETAIL 3501-2000 For 99-23 Softail $119.99 SWINGARM SADDLEBAG • Easily mountable using sturdy mounting straps • Features a rigid plastic back • Includes protective film to keep the swingarm or frame from being scratched • Available in synthetic black leather • 10.5” L x 4.5” W x 11.5” H NOTE: Not for use with passenger floorboards or passenger footpegs. PART # DESCRIPTION SUG. RETAIL 1501-0787 For 22-23 RH975/975S $229.95 21” SISSY BAR • Durable steel construction • Solid mount with bolt-on installation • Powdercoated in gloss black for longevity • Integrated backrest pad for passenger comfort, pad measures 6” x 3” x 2.5” • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1510-1140 For 23 RH975 $219.95 7” SOLO LUGGAGE RACK • Bigger and beefier luggage rack that still maintains style • Outside rails made of heavy .065” tubing; inside rails are 3/ 8” solid steel • Measures approximately 11” long x 7” wide • Gloss black finish • Made in the U.S.A.
JANUARY 2024 THE DRAG SPECIALTIES 7 dragspecialties.com PART # DESCRIPTION SUG. RETAIL 0801-1485 Smooth, solar-reflective leather $509.95 0801-14781 Smooth, vinyl 453.95 0801-14811 Double diamond, black thread 517.95 PART # DESCRIPTION SUG. RETAIL 0801-14821 Double diamond, silver thread $534.95 0801-14841 Double diamond, red thread 534.95 1 Not solar-reflective leather. FREEDOM TOURING SEATS • Features solar-reflective leather in the seating area and high-quality automotive-grade vinyl on the sides (unless noted) • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint FOR 09-23 FLHT/FLHR/FLHX/FLHTC/FLHTCU/FLHTCUTG/FLTRX/FLTRU/FLTRK/FLRT MODELS (EXCEPT 23 FLHXSE/FLTRXSE); 301/ 2” L OVERALL 15” W FRONT X 13” W REAR) PART # DESCRIPTION SUG. RETAIL FOR 13-23 FLHX/FLHXS/FLTRX/FLTRXS, 17-23 FLHRXS 2030-2313 Black $299.99 2030-2309 Chrome 299.99 PART # DESCRIPTION SUG. RETAIL FOR ALL MODELS WITH STANDARD 3-HOLE MOUNTING PATTERN 2030-2310 Black $249.99 2030-2311 Chrome 249.99 CURVED LED LICENSE PLATE MOUNT KITS • Curved horizontal mount design • Low profile aluminum construction frame and backing plate • Elypse 3-1 frames feature a white LED tag light and red/amber LEDs for brake and turn functions • Frame dimensions: 73/ 16” L x 41/ 4” W; mounting hardware included • Great addition to Kodlin Sleek 3-1 Rear Indicators • Available in black or chrome finish 2030-2311 2030-2313 PART # DESCRIPTION SUG. RETAIL 0801-1497 For 97-07 FLHT/FLTR (except FLHX) $338.00 0801-1498 For 97-07 FLHR/FLHX (except FLHRS) 338.00 DOMINATOR SOLO SEATS • Combines GelCore™ interior, progressive-density foam and a Gel Channel™ cover to provide riders with unparalleled comfort, control and modern style • In addition to pressure relief, the Gel Channel center of the seat provides an airflow passage • The rugged carbon fiber weave and smooth vinyl cover hold up to hard use and still retains its good looks • Marine-grade fiberglass pans and chrome brackets make sure the seat is durable for decades of riding • Easy to install; some seats and pillion pads include additional mounting hardware as needed • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0802-1530 For 18-23 FXLR/FXLRS/FXLRST/FLSB $475.00 FXR DIVISION SEAT • Show-tested and purpose-built • Slim design follows the contour of the bike’s frame • High lumbar area keeps the rider locked into the seat • Combines a GelCore™ interior with Ultra-Foam to create a perfect balance of rigidity and user compliance • Ultra-Foam’s unique molding process creates an element-resistant, self-skinning process that seals the foam from water and enhances the seat’s durability as well as comfort • Installs easily with all necessary mounting hardware and instructions • Made in the U.S.A. • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A. 0801-1485 0801-1478 0801-1481 0801-1484 0801-1482 0801-1497
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 8 S&S CYCLE Add performance and incredible visual style with an S&S air cleaner featuring the new Lava Chrome finish. This unique new finish features the mirror finish of traditional chromium, then gives it a smoky radiance for a unique dark look that retains the reflective qualities. Plus all the quality and performance you have come to expect from S&S Cycle. PART # DESCRIPTION SUG. RETAIL 1010-3175 For all 17-23 M-Eight engines $369.95 LAVA CHROME STEALTH TEARDROP AIR CLEANER KIT • Stealth intake provides 38 percent increase in flow • Lava Chrome finish features the mirror finish of traditional chromium, then gives it a smoky radiance for a unique dark look that retains the reflective qualities • High-strength synthetic polymer backplate is designed to reduce heat transfer to intake air • Cooler, denser air allows for more efficient cylinder fill and better performance • Easy installation • Washable filter element • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 17-23 M-EIGHT ENGINES 1010-3176 Lava Chrome mini teardrop stealth air cleaner kit $369.95 1014-0371 Repl. Lava Chrome mini teardrop air cleaner cover 199.95 LAVA CHROME MINI TEARDROP STEALTH AIR CLEANER KIT • 85% of original size for perfect proportions; all laid over the easy-to-install Stealth Air Cleaner system • Lava Chrome finish features the mirror finish of traditional chromium, then gives it a smoky radiance for a unique dark look that retains the reflective qualities • Built-in stinger cone directs air smoothly into the bore of the carburetor or EFI throttle body, reduces turbulence and increases flow • Machined openings around the rim add style and provide additional airflow • Kit includes cover, backing plate, filter and hardware • Replacement Lava Chrome mini stealth teardrop air cleaner cover available separately, will fit all S&S mini stealth air cleaners • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1014-0370 Lava Chrome teardrop Stealth air cleaner cover $199.95 LAVA CHROME STEALTH TEARDROP AIR CLEANER COVER • Fit the S&S Stealth air cleaner kits • Lava Chrome finish features the mirror finish of traditional chromium, then gives it a smoky radiance for a unique dark look that retains the reflective qualities • Made in the U.S.A. 1014-0371
JANUARY 2024 THE DRAG SPECIALTIES 9 dragspecialties.com PART # DESCRIPTION SUG. RETAIL 1107-0727 Polished $524.95 PART # DESCRIPTION SUG. RETAIL 1107-0728 Black $524.95 FUNCTION-FORMED™ TRANSMISSION SIDE COVERS/ACTUATORS • Function-Formed™ style milled from 6061-T6 aluminum • Low-profile external features allow maximum exhaust clearance • 12-point stainless steel ARP bolts and gasket included • Large 5/ 16-24 bleeder screw for durability • Includes 11/ 8” diameter piston • Kit includes actuator rod with bearings, center rod, clutch adjuster and plate with retaining ring, and M-Eight hydraulic line adaptor • Available in polished or black finish FOR 17-23 M-EIGHT STOCK 6-SPEED, BAKER DD7, BAKER GRUDGEBOX TRANSMISSIONS • Made in the U.S.A. NOTE: Designed for use on M-Eight models with OEM hydraulic clutch as well as M-Eight models being converted to a hydraulic clutch. Will require the use of a 15mm bore master cylinder. PART # DESCRIPTION SUG. RETAIL 0940-2136 For 21-23 FLHR/FLHT/FLHX/FLTR, 18-23 Softails w/ stock mechanical clutch $249.95 0940-2135 For 14-20 FLHR/FLHT/FLHX/FLTR w/ stock hydraulic clutch 299.95 RACE SERIES TRANSMISSION SIDE COVERS • CNC-machined from billet aluminum • Provides a race-inspired look • Works with both hydraulic and cable clutches • Available in Black Ops™ finish • Black Ops™ features a gloss black finish over a contrasting texture black finish for outstanding looks and durability • Chrome hardware and gasket included PART # DESCRIPTION SUG. RETAIL 0940-2139 For 17-23 FLHT/FLHR/FLHX/FLTRX/FLTRU, 18-23 Softails and HD FL Trike models $179.95 TRANSMISSION TOP COVER • CNC-machined from billet aluminum • Designed as a direct replacement for OEM transmission top cover • Easy bolt-on installation • Hardware included • Race design helps dissipate heat more effectively than stock covers and provides a race-inspired look • Black Ops™ is a gloss black finish on top of a contrasting textured black finish for outstanding toughness and design PART # DESCRIPTION SUG. RETAIL 0940-2134 For 17-23 M-Eight models $329.95 CAM COVER • Direct replacement for stock cover • Machined Performance Machine logo • All hardware and gasket included • Race design helps dissipate heat more efficiently versus stock covers and provides a race-inspired look • Available in Black Ops™ finish • Black Ops™ finish features gloss black over a contrasting texture black finish for outstanding durability and looks • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0940-2138 For 16-23 FLHT/FLHR/FLHX/FLTRX/FLHTCUTG/ FLRT/FLTRT and 15 FLHTCUL/FLHTKL models $149.95 0940-2137 For 18 FLSB, 19-23 Softails, and 18 Softail models w/ narrow profile primary covers 149.95 DERBY COVERS • Direct replacements for stock derby covers on OEM primaries • Machined Performance Machine logo • Race design dissipates heat more efficiently versus stock covers and provides a race-inspired look • Black Ops™ finish features gloss black over a contrasting texture black finish for outstanding durability and looks • Hardware and gasket included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 2110-1301 For 74-88 Big Twin, 74-E76 XLH equipped w/ Hitachi starters (51/ 4” long); repl. OEM #s 31570-73/B/C/T $159.95 2110-1303 For 65-82 Big Twin, 67-80 XL equipped w/ Prestolite starters (6” long); repl. OEM #s 31458-66/A/B/C/TA 112.95 STARTERS • New 12V starter motors • Bolt-on replacements for OEM starter 1107-0727 1107-0728 2110-1301 0940-2137 0940-2136
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 10 PART # SUG. RETAIL DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK FOR 96-23 FLHT/FLHX/FLHTCUTG/FLHXXX MODELS 0601-6284 $390.00 10” Bagger 10” 331/ 2” 12” 51/ 4” 0601-6285 390.00 12” Bagger 12” 331/ 2” 12” 51/ 4” 0601-6286 390.00 14” Bagger 14” 331/ 2” 12” 51/ 4” 11/ 4” BRONZE TWIN PEAKS TOURING HANDLEBARS • Handlebars with an emphasis on touring comfort • More parallel wrist angles for a perfect pullback angle and stress-free riding • Flowing bends on the uprights designed specifically for batwing fairing bikes • 31/ 2” on-center knurling, 1” clamping area • Drilled for internal wiring • Work with hydraulic clutches • Can be used on cable and TBW (Throttle-By-Wire) applications • Eye-catching bronze finish • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. PART # DESCRIPTION SUG. RETAIL 0602-1450 For 12-23 Chieftain/Roadmaster $134.95 2” PIVOTING BAR RISER KIT • Bring the stock handlebar location back toward the rider by approximately 2” • These risers are a great option for riders who want to get more upright in the seat and/or get weight off of their arms, neck and shoulders • Work with stock cables and brake line • Riser clamping positioning will be limited by the large OEM fairing assembly • Riser clamping portion is 11/ 4” in diameter • Accept handlebars with 11/ 4” clamping area • Polished silver finish • Made in the U.S.A. NOTE: Will not work on 17-23 models with Ride Command. US Patent #6,920,806. PART # DESCRIPTION SUG. RETAIL 0602-1455 For 15-24 Scout models $114.95 2” PIVOTING BAR RISER KIT • 2” fully adjustable bar riser allows you to dial in the perfect position for your build and riding style • Designed to allow the Indian speedometer assembly to mount directly into the top side of the risers • Comes with replacement caps to clamp the stem of the riser into the stock Indian bar clamp • Also comes with four longer bolts to allow the speedometer assembly to securely attach to the top side of the risers • Works with stock bars • Machined from solid aircraft-grade 6061-T6 billet aluminum • Black anodized finish • Includes all mounting hardware • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0602-1456 For 21-23 RA1250/1250S $132.95 11/ 2” BARBACK HANDLEBAR RISER KIT • Designed specifically for the Harley Davidson Pan America • 19/ 16” of diagonal rise; moves the bar approx. 13/ 8” up and approx. 3/ 4” back from the stock position • Machined from 6061-T6 aircraft grade billet aluminum • Engraved Rox logo for a clean and understated “factory” look • Includes all mounting hardware and instructions • Will work with OEM cables and lines • Black anodized (matte finish) • Made in the U.S.A. 0601-6285 PART # SUG. RETAIL END RISE WIDTH CENTER WIDTH PULLBACK FOR 15-23 FLTRX/S/ST, FLTRU/FLTRK MODELS 0601-6281 $390.00 10” 34” 9” 6” 0601-6282 390.00 13” 34” 9” 6” 0601-6283 390.00 16” 34” 9” 6” 11/ 4” BRONZE HEFTY TWIN PEAKS HANDLEBARS • Features 11/ 4” diameter in the clamping area • Works with the OEM riser and clamps; has the correct wire exit location • Bars include new black control clamps to replace the oversize OEM clamps • No need to remove the stock pin in the OEM mount clamps; bar still has more than 35° of adjustment • Knurled clamping area • Will work with hydraulic clutches • Eye-catching bronze finish • Made in the U.S.A. NOTE: Accept H-D OEM heated grips. 0601-6281
JANUARY 2024 THE DRAG SPECIALTIES 11 dragspecialties.com PART # DESCRIPTION SUG. RETAIL FOR 21-23 FLHT/FLHX/FLHR MODELS 0610-2249 Chrome $298.95 0610-2250 Black 298.95 PART # DESCRIPTION SUG. RETAIL FOR 21-23 FLTRX/FLTRK MODELS 0610-2251 Chrome $358.95 0610-2252 Black 358.95 BRAKE/MECHANICAL CLUTCH CONTROL KITS • Die-cast aluminum construction • Perfect fit with OEM-style switch housings (sold separately) • Accepts OEM-style switches and wiring • Master cylinders accept OEM-style rebuild kits and have clearance for all 11/ 4” handlebars 0610-2251 0610-2250 PART # DESCRIPTION SUG. RETAIL FOR 22-23 RH975/975S, 21-23 RA1250, 21-23 RH1250S 0630-3189 Black $129.95 FOR ALL 22-23 MODELS WITH 1” TBW CONTROLS 0630-3188 Black 149.95 0630-3187 Chrome 149.95 ALUMICORE GRIP SETS • Forged and CNC-machined from 6061-T6 aluminum • Rubber sleeve is constructed from thermoplastic vulcanizate (TPV) for optimal traction and comfort • TPV is highly UV-resistant and durable while maintaining a soft feel • Machined alloy end caps are removable to make replacing rubber grip sleeves fast and easy 0630-3189 0630-3187 PART # DESCRIPTION SUG. RETAIL 0630-3183 Soft, gray $12.95 0630-3184 Medium, black 12.95 MOTO GRIPS • Available for 1” handlebars • Choose either soft or medium firmness • Textured gripping area for extra control • Sold in pairs NOTE: Throttle sleeve not included. 0630-3184 0630-3183 PART # DESCRIPTION SUG. RETAIL 1621-1141 For 18-23 FLHC/S, FLFB/S, FLSL and FLDE models $229.96 MX STYLE DRIVER FLOORBOARDS • TIG-welded steel construction for strength • Black powdercoat finish for style • Serrated top design keeps your feet firmly planted on the boards, even during aggressive riding • Sold in pairs PART # DESCRIPTION SUG. RETAIL 1620-2502 Male mount footpegs (2.3” wide) $143.95 1620-2503 Male mount mini footpegs (1.76” wide) 143.95 MX-STYLE FOOTPEGS • Billet aluminum is nice for your dad’s Bagger, but steel is the real deal and MX-style pegs from Burly are just that • Inspired by the bear trap style of the 70s motocross machines • MX pegs have an adjustable angle that will let you tune them to your liking • Mini pegs have a more narrow design for a nice, balanced feel • The serrated edge will keep your feet planted • Sold in pairs 1620-2502
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 12 PART # DESCRIPTION DIA. HUB DIA. SUG. RETAIL FRONT LEFT ROTOR 1711-2174 For 00-14 Big Twin, 00-13 XL (except 08-14 Dressers and H-D FL Trike, FXSTS/SB, FLSTSB/SC, V-Rod, 06-14 Dyna Glide, 13-14 FXSB/SE) 11.5” 2.22” $198.95 FRONT RIGHT ROTOR 1711-2175 For 00-14 Big Twin, 00-13 XL (except 08-14 Dressers and H-D FL Trike, FXSTS/SB, FLSTSB/SC, V-Rod, 06-14 Dyna Glide, 13-14 FXSB/SE) 11.5” 2.22” 198.95 REAR ROTORS 1711-2178 For 18-23 FXLR/FLDE/FLHC/FLHCS/FLSL/FXBB, 00-17 Big Twin (except 08-17 Dressers and H-D FL Trike, 13-17 FXSB/SE) 11.5” 2.22” 198.95 1711-2179 For 11-22 XL (except RH Sportster) 10.25” 2.22” 198.95 1711-2177 For 00-10 XL 11.5” 2.22” 198.95 FLAME FIXED BRAKE ROTORS • Developed to perform under heavy loads and in combination with today’s powerful Harley aftermarket brake calipers • Made from premium quality stainless steel • CNC laser cut and precision double ground within the tightest tolerances to reduce vibration • High corrosion-resistance • Front left and front right sold separately • Sold each 1711-2174 PART # DESCRIPTION DIA. HUB DIA. SUG. RETAIL FRONT ROTOR 1711-2168 For 00-14 Big Twin, 00-13 XL (except 08-14 Dressers and H-D FL Trike, FXSTS/SB, FLSTSB/SC, V-Rod, 06-14 Dyna Glide, 13-14 FXSB/SE) 11.5” 2.22” $198.95 REAR ROTORS 1711-2169 For 18-23 FXLR/FLDE/FLHC/FLHCS/FLSL/FXBB, 00-17 Big Twin, 00-10 XL (except 08-17 Dressers and H-D FL Trike, 13-17 FXSB/SE) 11.5” 2.22” 198.95 1711-2170 For 11-22 XL (except RH Sportster) 10.25” 2.22” 198.95 ADRIAN FIXED BRAKE ROTORS • Developed to perform under heavy loads and in combination with today’s powerful Harley aftermarket brake calipers • Made from premium quality stainless steel • CNC laser cut and precision double ground within the tightest tolerances to reduce vibration • High corrosion-resistance • Omnidirectional, can be used in either right or left side applications • Dual disc applications require the purchase of two front rotors • Sold each 1711-2168 PART # DESCRIPTION DIA. HUB DIA. SUG. RETAIL FRONT ROTOR 1711-2171 For 00-14 Big Twin, 00-13 XL (except 08-14 Dressers and H-D FL Trike, FXSTS/SB, FLSTSB/SC, V-Rod, 06-14 Dyna Glide, 13-14 FXSB/SE) 11.5” 2.22” $198.95 REAR ROTORS 1711-2172 For 18-23 FXLR/FLDE/FLHC/FLHCS/FLSL/FXBB, 00-17 Big Twin, 00-10 XL (except 08-17 Dressers and H-D FL Trike, 13-17 FXSB/SE) 11.5” 2.22” 198.95 1711-2173 For 11-22 XL (except RH Sportster) 10.25” 2.22” 198.95 RIALTO FIXED BRAKE ROTORS • Developed to perform under heavy loads and in combination with today’s powerful Harley aftermarket brake calipers • Made from premium quality stainless steel • CNC laser cut and precision double ground within the tightest tolerances to reduce vibration • High corrosion-resistance • Omnidirectional, can be used in either right or left side applications • Dual disc applications require the purchase of two front rotors • Sold each 1711-2172
JANUARY 2024 THE DRAG SPECIALTIES 13 dragspecialties.com PART # DESCRIPTION DIA. HUB DIA. SUG. RETAIL FRONT LEFT ROTOR 1711-2163 For 00-14 Big Twin, 00-13 XL (except 08-14 Dressers and H-D FL Trike, FXSTS/SB, FLSTSB/SC, V-Rod, 06-14 Dyna Glide, 13-14 FXSB/SE) 11.5” 2.22” $198.95 FRONT RIGHT ROTOR 1711-2164 For 00-14 Big Twin, 00-13 XL (except 08-14 Dressers and H-D FL Trike, FXSTS/SB, FLSTSB/SC, V-Rod, 06-14 Dyna Glide, 13-14 FXSB/SE) 11.5” 2.22” 198.95 REAR ROTORS 1711-2166 For 18-23 FXLR/FLDE/FLHC/FLHCS/FLSL/FXBB, 00-17 Big Twin (except 08-17 Dressers and H-D FL Trike, 13-17 FXSB/SE) 11.5” 2.22” 198.95 1711-2167 For 11-22 XL (except RH Sportster) 10.25” 2.22” 198.95 1711-2165 For 00-10 XL 11.5” 2.22” 198.95 TULSA FIXED BRAKE ROTORS • Developed to perform under heavy loads and in combination with today’s powerful Harley aftermarket brake calipers • Made from premium quality stainless steel • CNC laser cut and precision double ground within the tightest tolerances to reduce vibration PART # DESCRIPTION OEM # SUG. RETAIL FRONT BRAKE PADS (SOLD IN PAIRS) 1721-3489 For 08-23 FLHT/FLHR/FLHX/FLTR/ FLTRX/FLTRU/FLTRK, 09-13/19-23 H-D FL Trike 41854-08 $43.95 1721-3492 For 84-99 FLT/FLHT/FLHR/FLTR 44063-83A/C 45.95 1721-34911 For 15-23 Softail 41300102 43.95 1721-3487 For 08-14 FXS/FXSTB/FXSTC/FLS/ FLSTC/FLSTF/FLSTN/FXCW/FXCWC/ FLSTFB, 08-17 FXD/FXDC/FXDB/ FXDL/FXDF/FLD/FXDWG 44082-08, 46363-11 43.95 1721-3488 For all 00-07 Big Twin (except FXSTS/I and FLSTSC/I) 44082-00C/D 43.95 1721-3492 For 05-07 FLSTSC/I, 99-03 FLSTS, 99-06 FXSTS/I, 08-11 FLSTSB, 84-99 FXST/FLST/FXWG 44063-83A/C 45.95 PART # DESCRIPTION OEM # SUG. RETAIL FRONT BRAKE PADS (SOLD IN PAIRS) (CONT) 1721-3492 For 91-98 Dyna Glide, 84-85 FXE/ FXEF/FXSB, 84-94 FXR/FXRS/FXRT 44063-83C $45.95 1721-3489 For 22-23 RH975/S 41854-08 43.95 1721-3490 For 14-22 XL (except RH Sportster) 41300004 45.95 1721-3488 For 00-03 XL 44082-00C/D 43.95 1721-3492 For 84-99 XL 44063-83A/C 45.95 1721-34911 For 08-12 XR1200, XR1200X 42739-08 43.95 1721-3489 For 06-17 V-Rod 42897-06A/08 43.95 1 Dual disc models require two sets. PART # DESCRIPTION OEM # SUG. RETAIL REAR BRAKE PADS (SOLD IN PAIRS) 1721-3502 For 08-23 FLHT/FLHR/FLHX/FLTR (except H-D FL Trike) 42850-06B, 41852-08 $43.95 1721-3505 For 86-99 FLT/FLHT/ FLHS/FLHR/FLTR 42957-86A, 43957-86B/E, 43967-86B/D 45.95 1721-3503 For 18-23 Softail 41300197 43.95 1721-3501 For 08-17 FXS/FXSTB/ FXSTC/FLS/FLSTF/FLSTN/FLSTC/ FXCW/FXCWC/FLSTFB/FLSTSB, 08-17 FXD/FXDC/FXDB/FXDL/ FLD/FXDWG 42298-08 43.95 1721-3500 For 06-07 FXSTB/C, 07 FLSTF 46721-06 43.95 1721-3499 For all 00-07 Big Twin models (except 06-07 FXST, 07 FLSTF) 44082-00/C 45.95 1721-3504 For L87-99 FXST/FLST 44213-87, 44209-87 45.95 PART # DESCRIPTION OEM # SUG. RETAIL REAR BRAKE PADS (SOLD IN PAIRS) (CONT) 1721-3504 For 91-98 Dyna Glide 44213-87, 44209-87C $45.95 1721-3504 For L87-94 FXR/FXRS/FXRT 44213-87C, 44209-87 45.95 1721-3496 For 14-22 XL (except RH Sportster) 41300053 43.95 1721-3498 For 04-13 XL 42836-04, 42029-07 45.95 1721-3498 For 08-12 XR1200, XR1200X 42836-04, 42029-07 45.95 1721-3499 For 00-03 XL 44082-00 45.95 1721-3504 For L87-99 XL 44213-87, 44209-87 45.95 1721-3493 For 16-20 XG500/750 41300161 47.95 1721-3497 For 20-23 ELW 41300230 43.95 1721-3502 For 06-17 V-Rod 42850-06B 43.95 1721-3495 For 21-23 RA1250/RA1250S 41300241 47.95 ROADPRO SINTERED METAL BRAKE PADS • For the new generation of high performance Sport, Touring and Custom motorcycles • Offers a combination of fade-free brake performance, great brake feel and thermal stability • Developed for sport riding and high loads from heavy motorcycles 1711-2164 • High corrosion-resistance • Front left and front right sold separately • Sold each 1721-3492 1721-3501
JANUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 14 *DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES PART # DESCRIPTION SUG. RETAIL 1701-0767 Black $148.98 1701-0768 Chrome 148.98 RADIAL MOUNT FRONT BRAKE CALIPER ADAPTER KITS • A performance solution to better braking • Designed to fit Hawg Halters radial mount 6-piston caliper PART #s 1701-0749, 1701-0750, 1701-0751 and 1701-0752 on 08-23 Touring, 16-23 Softail or 08-17 V-Rod models with factory fork legs and 11.8” rotors • Each bracket is precision CNC-machined from 6061 billet aluminum and comes complete with Grade 8 chrome mounting bolts • Caliper and bracket are designed for the popular 108mm mounting configuration with a 22.5mm offset • Also includes hardware and spacers to work with a 13” rotor • Bracket is symmetrical for either right hand or left hand installation; order two for dual-disc applications • Made in the U.S.A. 1701-0767 1701-0768 PART # DESCRIPTION SUG. RETAIL FOR 08-23 FLHR/FLT/FLHT/FLTR/FLHX, 08-17 V-ROD MODELS 1701-0769 Right hand, black $138.78 1701-0770 Left hand, black 138.78 1701-0771 Right hand, chrome 138.78 1701-0772 Left hand, chrome 138.78 13” AXIAL BRAKE CALIPER ADAPTER BRACKETS • A dramatic and easy upgrade for better braking • Designed to fit when using 13” rotors with stock fork legs and stock axial mount brake calipers • Precision CNC-machined from 6061 billet aluminum • Includes Grade 8 chrome mounting bolts • Order one each right hand and left hand for dual-disc applications • Made in the U.S.A. 1701-0769 1701-0772 Fi2000X FUEL INJECTION CONTROLLERS* • The newest addition to the Fi2000 family of fuel management systems • Real-time load-based monitoring system adjusts the fuel faster than you can twist the throttle • Delivers almost the exact same mpg as stock while boosting performance • Designed to work best with aftermarket high-flow air filters/air cleaners and a high-flow exhaust system • Has an app for Andriod/iPhone® platforms for tuning and system displays PART # FITS MODEL SUG. RETAIL 1020-4125 For 21-22 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLHTCUTG/FLRT $339.95 1020-4123 For 17-20 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLHTCUTG/FLRT 339.95 1020-4122 For 14-16 FLHT/FLHR/FLHX/FLTRX/FLTRU/FLHTCUTG/FLRT 339.95 1020-4124 For 18-23 Softails 339.95 1020-4121 For 14-22 XL (except RH Sportsters) 339.95 1020-4132 PART # DESCRIPTION SUG. RETAIL 0636-0430 Handlebar mount kit $78.88 POWER VISION 3/ POD-300 MOUNT KIT • Secure bolted installation makes for the perfect placement while driving • The perfect complement for the Power Vision 3 fuel tuner and POD-300 display • Works on handlebars up to 11/ 4” • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1020-4101 For 14-20 FLHT/FLHX/FLHR/FLTRX/FLTRU/FLTRK, 11-20 Softail models, 12-17 Dyna models, 14-22 XL (except RH Sportster) and 15-20 XG models (6-pin connector) $54.43 1020-4098 For all H-D models w/ Delphi EFI (except 11-20 Softails, 12-17 Dynas, 14-20 Dressers, 14-22 XL, 02-17 V-Rod, and 15-20 XG models) (4-pin connector) 54.43 POWER VISION INTERFACE CABLES • For connecting Dynojet Power Vision to diagnostic tool • Made in the U.S.A. 1020-4098 1020-4101
JANUARY 2024 THE DRAG SPECIALTIES 15 dragspecialties.com PART # DESCRIPTION SUG. RETAIL 2040-3146 For 09-23 FLHTCUTG, 15-23 FLRT, 23 FLTRT, 20-22 FLHTCUTGSE and 10-11 FLHXXX $459.95 PROGLOW™ COLOR-CHANGING LED ACCENT LIGHT KIT • Uses the latest color-changing technology with the most expansive offering of color, pattern and combination of functions • 5050 color-changing LEDs with a 120° viewing angle • Control app connects to IOS or Android for Bluetooth® control of all functions • Kit includes ProGLOW™ Bluetooth controller, eight ProGLOW™ 15 LED strips, four ProGLOW™ 6 LED strips and one ProGLOW™ 3 LED strip • Install with double-sided tape • Can daisy chain LED strips together with affixed and watertight IP67 connectors • ProGLOW™ splitters, wire extensions and end caps included for a complete installation • Plug-and-play wiring installation PART # DESCRIPTION SUG. RETAIL 2020-2162 For 18-23 Scout Bobber/Sixty/Twenty/Rogue/Rogue Sixty $189.95 PROBEAM® REAR LED TURN SIGNALS • Outer ring of 16 red LEDs that function as running lights • Twelve center red LEDs function as turn signal • Gloss black housing finish with red lenses • Smart Triple Play® (PART #2050-0408) required for run/brake/turn signal function (sold separately) PART # DESCRIPTION SUG. RETAIL 2020-2161 For 14-23 FLHX/FLHXS/FLTRX/FLTRXS, 17-23 FLHRXS, 18-23 FXBB/FXBBS/FLFB/FLFBS/FXFB/FXFBS/FXST, 18-21 FLSL,18-23 FXBR/FXBRS, 11-17 FXS/FLS/FLSS/FXSB/FXDB, 12-17 FXDWG/FXDLS, 14-22 XL883N/XL1200X/XL1200V/XL1200CX/XL1200NS, 11-12 FLSTSE2, 14-15 FLSTNSE, 14 FXSBES $219.95 GENESIS® 4-LED TURN SIGNAL INSERT KIT • Includes front and rear Genesis® 4-LED turn signal inserts with smoked front and red rear turn signal lenses • Each insert offers 48 super bright LEDs on a black circuit board producing a halo-free running light and turn signal • Front inserts produce a bright white 6000K running light and full contrast amber turn signal • Rear inserts are dual-intensity red, with red running light and full-intensity turn signal • Plug-and-play 1157 bulb base • Sold as a kit PART # DESCRIPTION SUG. RETAIL 2020-2193 Gloss black housing w/ amber/red LED $69.95 MICRO BULLET AMBER/RED V2 LED REAR TURN SIGNALS • Measure smaller than a quarter in diameter • Aluminum bullet housing with a gloss black finish • Sealed spherical acrylic lens to maximize LED output • Three-wire unit functions as red brake light with full-contrast amber turn signal with no additional converters required • 45” leads are pre-pinned for use with optional wire harnesses available for plug-and-play installation (PART #s 2050-0494, 2050-0493 and 2050-0492; sold separately) • Can also be hardwired, will work with any 12-16VDC systems with negative ground • Mounting brackets sold separately • Dimensions: .87” W x .5” L; .16” standoff • Sold in pairs • DOT/SAE compliant • Plug-and-play installation • Sold in pairs
JANUARY 2024 THE DRAG SPECIALTIES 16 9901-3429 PART # DESCRIPTION SUG. RETAIL 2001-2696 For 22-23 FXLRST/FXRST models $29.95 PROBEAM® HEADLIGHT MOUNTING KIT • Aluminum mounting bracket attaches to OEM headlight support ring on Low Rider ST & El Diablo models • Bracket offers mounting solution for ProBEAM 5.75” standard headlights (PART #s 2001-1749/2001-1750 (sold separately)) as a direct replacement for the OEM headlight (67700345A) • Included wire adapter connects to OEM headlight harness with H4 plug to plug into the ProBEAM headlight. Mounting hardware also included with kit • Satin black finish PART # DESCRIPTION SUG. RETAIL 2001-2695 For 18-20 FXLR, 18-23 FXBB/ FXBBS, 20-23 FXST $24.95 HEADLIGHT MOUNTING BLOCK • For use with Custom Dynamics 53/ 4” headlight bucket PART #2001-2599 (sold separately) • Gloss black finish PART # DESCRIPTION SUG. RETAIL 2040-3139 For 15-23 FLTRX/FLTRXS, 22-23 FLTRXST/FLTRKSE, 20-23 FLTRK, 18-22 FLTRXSE, 16-19 FLTRU, 20-22 FLTRUSE, 23 FLTRT $19.95 LIGHT BAR MOUNT BRACKET • Heavy-duty steel mount bracket attaches to the inner fairing mount • Designed for use with Custom Dynamics LED driving light bar PART #s 2001-2442 or 2040-2829 (sold separately) • Mounting hardware included PART # DESCRIPTION SUG. RETAIL 2120-1246 For 14-23 FLHX/FLHXS/FLHXST/FLTRX/FLTRXS/FLTRXST/FLTRU/FLTRUSE/FLTRK/ FLTRKSE/FLHR/FLHRXS/FLHT/FLHTCU/FLHTCUL/FLHTK/FLHTKL/FLHTKSE $44.95 WIRE HARNESS FOR CVO™ TAILLIGHTS • Direct plug-and-play harness for quickly connecting ProBEAM CVO™ taillights • For 14-23 models with 2013-earlier style CVO™ rear fender conversion PART # DESCRIPTION SUG. RETAIL 2040-3145 For 06-13 FLHTCU/FLHTCUSE, 09-13 FLHTCUTG, 10-13 FLHTK, 06 FLHTCSE, 11-12 FLHXSE, 11-12 FLTRU, 11 FLTRUSE $199.95 DYNAMIC LED LOWER FAIRING INSERTS • Direct replacement for the lower fairing radiator grilles or filler plates • More than 130 white and amber LEDs per side • When the turn signal is activated the white DRL running light turns completely off, providing greater visibility to the amber turn signal • Attach to the OEM lower fairings with double-sided tape • Airflow can still be controlled by opening or closing the lower OEM vent assembly • Plug-and-play wire harness connector • Sold in pairs
www.dragspecialties.comRkJQdWJsaXNoZXIy OTcxOTk3