DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES,INCLUDING CALIFORNIA.PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE“COMPETITION USE”ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* SUG. RETAIL FOR 18-23 FXLRST/FLHC/FLSB MODELS 1800-2646 Natural 3 $1,149.95 PART # DESCRIPTION EMIS* SUG. RETAIL FOR 18-23 FXLRST/FLHC/FLSB MODELS (CONT) 1800-2647 Black ceramic 3 $1,149.95 ASSAULT 2-INTO-1 EXHAUST SYSTEMS • Made from high-quality stainless steel, mandrel bent, then TIG-welded • Includes custom heat shields with wire tied fasteners for race-inspired look • Double slip fit and gusset for additional strength • O2 ports included • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1210-2759 25-tooth drive sprocket $145.95 REPLACEMENT FRONT SPROCKET FOR 530 CHAIN DRIVE CONVERSION KITS • Replacement front sprocket for conversion kits PART #s 1210-2458 and 1210-1851 (sold separately) • Heat-treated and coated for added durability • Made in the U.S.A. 1800-2646 1800-2647 THE DRAG SPECIALTIES FEBRUARY 2024 dragspecialties.com
FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 2 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* SUG. RETAIL FOR 18-23 FXST, FXBB/FXBBS, FXLR, FXLRS, FXFB/FXFBS, FLSL AND FLSB MODELS 1800-2667 Stainless steel 2 $1,273.95 1800-2671 Black 2 1,185.95 1800-2672 Chrome 2 1,249.95 THE RIPPER 2-INTO-1 SHORT EXHAUST SYSTEMS • Designed with a louder, more aggressive tone than the Shorty Road Rage M8 Softail exhaust systems • Stepped 13/ 4” to 17/ 8” headpipes • Fully welded one-piece design • Catalyzed compliant baffle core • Full heat shields • Angle cut end cap • 18mm O2 bungs with 12mm adapters • Made in the U.S.A. 1800-2667 1800-2672 1800-2671
FEBRUARY 2024 THE DRAG SPECIALTIES 3 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION SUG. RETAIL 4405-0932 For 15-23 FLTRX models (except 23 FLTRXSE) $899.99 PART # DESCRIPTION SUG. RETAIL 4405-0933 For 14-23 FLHX models (except 23 FLHXSE) $899.99 PLUG-AND-PLAY AUDIO KITS • True plug-and-play full system • Kit includes one pair of PSC652 coaxial speakers, one pair of grills, 4 channel 300 watt amplifier, custom amplifier mounting bracket, full plug-and-play harness and all necessary installation hardware • Weather-proof design • High efficiency sound performance 4405-0933 4405-0932
FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 4 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION SUG. RETAIL FOR 08-23 FLHT/FLHTC/FLHTCU/FLHR/FLHX/FLTRX/FLTRU/FLTRK/FLRT MODELS (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL 113/ 4” W FRONT X 9” W REAR 0801-1495 Smooth, solar-reflective leather $464.95 0801-14871 Smooth, vinyl 376.95 0801-14901 Double diamond, black thread 432.95 0801-14921 Double diamond, silver thread 449.95 0801-14941 Double diamond, red thread 449.95 1 Not solar-reflective leather. PERFORMANCE PREDATOR 2-UP SEATS • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A 0801-1487 0801-1490 0801-1492 0801-1495 0801-1494
FEBRUARY 2024 THE DRAG SPECIALTIES 5 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION SUG. RETAIL FOR 08-23 FLHT/FLHTC/FLHTCU/FLHR/FLHX/FLTRX/FLTRU/FLTRK/FLRT MODELS (EXCEPT 23 FLHXSE/FLTRXSE); 30” L OVERALL 113/ 4” W FRONT X 6” W REAR 0801-1493 Smooth, solar-reflective leather $424.95 0801-14891 Double diamond, silver thread 428.95 0801-14911 Double diamond, red thread 428.95 1 Not solar-reflective leather. PERFORMANCE PREDATOR 1-UP SEATS • Features solar-reflective leather in the seating area (unless noted) and automotive-grade vinyl on the sides • Features a 53/ 4” tall driver support • Molded polyurethane foam for maximum comfort and styling • 3/ 16” ABS thermoformed seat base for a perfect fit, with a carpeted bottom and rubber bumpers to protect paint • Seat is made narrow up front for better leg clearance • Includes all mounting hardware • Made in the U.S.A PART # DESCRIPTION SUG. RETAIL 0214-2723 For 20-23 FXLRS/FXLRST/FXRST, 18-23 FXFB/FXFBS, 19-20 FXDRS, 18-21 FLSB; repl. OEM #43000159 $29.95 0214-2724 For 18-23 FLFB/FXBR/FXLR/FLDE/FLSL/FLHC/FXST; repl. OEM #43000090 29.95 FRONT AXLE COVER INSTALLATION KITS • Required for installation of accessory front axle covers • Kit includes threaded axle spacer, left and right adapters and all hardware PART # DESCRIPTION LENGTH APPLICATION OEM # SUG. RETAIL 0214-2716 For 08-17 V-Rod 0.283” Left rear 41550-08 $8.95 0214-2717 For 02-07 V-Rod 0.811” Right/left front 43642-01A 11.95 0214-2718 For 02-07 V-Rod 0.622” Left rear 40437-01A 10.95 0214-2719 For 02-07 V-Rod 0.319” Right rear 43571-01A 8.95 WHEEL SPACERS • Polished and chrome-plated • OEM replacements • Sold each 0214-2716 0214-2718 0214-2723 0801-1491 0801-1493 0801-1489
FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 6 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION SUG. RETAIL FOR 14-23 FLHR/FLHT/FLHX/FLTR W/ CHOPPED TOUR-PAK 0822-0551 Road Sofa $195.00 0822-0552 Road Sofa PT 195.00 0822-0553 Road Sofa LS 199.00 0822-0554 Dominator 195.00 PART # DESCRIPTION SUG. RETAIL FOR 14-23 FLHR/FLHT/FLHX/FLTR W/ CHOPPED TOUR-PAK (CONT) 0822-0555 Step Up LS $195.00 0822-0556 Slim RP 195.00 0822-0557 Road Sofa CF 195.00 CHOPPED TOUR-PAK® PADS • Integrate the look of your Saddlemen seat with your Chopped Tour-Pak • Each complete Chopped Tour-Pak pad is built on a strong, rigid base pan and includes all the hardware you need for easy installation • Constructed from durable, comfortable Saddlehyde material • Multiple stitch patterns and designs to match your rider’s saddle, available in black • Made in the U.S.A. 0822-0551 0822-0552 0822-0553 0822-0554 0822-0555 0822-0557 0822-0556 PART # DESCRIPTION SUG. RETAIL 3510-0180 Slim handlebar bag $69.95 SLIM HANDLEBAR BAG • Offers slim storage with the ability to expand to fit a variety of items • Mount on the front or rear of risers to provide a clean profile between fairings and gas tanks • Constructed from durable 1680D ballistic nylon • High-viz orange interior lining • Front microfiber-lined pocket is perfect for sunglasses or electronics • MOLLE webbing on front pocket • Multiple possible mounting configurations for different size risers • Measures 9” H x 8” W x 2” D
FEBRUARY 2024 THE DRAG SPECIALTIES 7 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # FITS MODEL EMIS* SUG. RETAIL 1020-4116 For 10-13 FLHT/FLHX/FLHR/FLTR 3 $339.95 1020-4114 For 08-09 FLHT/FLHX/FLHR/FLTR 3 339.95 1020-4113 For 07 FLHT/FLHX/FLHR/FLTR 3 339.95 1020-4108 For 06 FLHT/FLHX/FLHR/FLTR 3 339.95 1020-4106 For 02-05 FLHT/FLHX/FLHR/FLTR 3 339.95 1020-4109 For 95-01 FLHT/FLHX/FLHR/FLTR 3 339.95 1020-4118 For 12-15 FXS/FLS/FLST (except 12-15 CVO models) 3 339.95 1020-4112 For 07 FXST/FLST 3 339.95 PART # FITS MODEL EMIS* SUG. RETAIL 1020-4110 For 06 FXST/FLST 3 $339.95 1020-4111 For 01-05 FXST/FLST 3 339.95 1020-4117 For 12-17 Dyna Glide (except FXDLS) 3 339.95 1020-4112 For 07 Dyna 3 339.95 1020-4120 For 07-13 XL1200 3 339.95 1020-4119 For 12-17 V-Rod 3 339.95 1020-4115 For 08-11 V-Rod 3 339.95 1020-4107 For 02-07 V-Rod 3 339.95 Fi2000X FUEL INJECTION CONTROLLERS • The newest addition to the Fi2000 family of fuel management systems • Real-time load-based monitoring system adjusts the fuel faster than you can twist the throttle • Delivers almost the exact same mpg as stock while boosting performance • Designed to work best with aftermarket high-flow air filters/ air cleaners and a high-flow exhaust system • Has an app for Andriod/iPhone® platforms for tuning and system displays PART # DESCRIPTION SUG. RETAIL 1050-0472 For 17-23 M-Eight $399.95 CNC-PORTED 55MM BLACK INTAKE MANIFOLD • 5-axis CNC ported manifold • Maximum aerodynamic efficiency • Textured finish encourages fuel dissipation and atomization • Works with stock or ported heads • High-temp, durable black powdercoat finish • Fits all 55mm throttle bodies • Made in the U.S.A. 1020-4106 PART # DESCRIPTION SUG. RETAIL FOR 22-23 FXLRST, 22 FXRST 2001-2738 Black $478.95 PART # DESCRIPTION SUG. RETAIL FOR 22-23 FXLRST, 22 FXRST (CONT) 2001-2739 Chrome $478.95 PROBEAM 5.75” LOW RIDER ST HEADLIGHT KIT • Features three high-power advanced optical D lenses that illuminate for low beam • High beam adds five additional lights for an extremely wide beam pattern • Low beam is 1.7 amps @ 12.8V • High beam is 2.23 amps @ 12.8V • Polycarbonate lens • 304 stainless steel mounting bracket • Included wiring adapter connects to the OEM headlight harness with an H4 connector on the ProBEAM® headlight • Mounting hardware included • SAE and DOT complaint • Made in the U.S.A. 2001-2739 2001-2738
FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 8 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION EMIS* SUG. RETAIL 0901-02611 For 07-16 Touring models (except Twin Cooled models) 3 $8,259.95 1 Require the use of oil line kit PART #0711-0220 for installation (sold separately). T124LC SERIES LONG BLOCK ENGINE • Lower Compression, 10.2:1, for great street torque • Includes Super Stock™ heads and T2 crankcase • TC3 oil pump and cam plate • Easy start 585 gear drive cams with redesigned cam cover • Specs: displacement 124”; bore 41/ 8”; stroke 45/ 8”; S&S forged dish pistons, 11cc; compression ratio 10.2:1 (unless noted) • No fuel system or ignition systems included • Special head machining fits stock length intake manifolds (S&S manifold size 405) • Stock style breathing system; compatible with stock and most performance air cleaners • Stone Gray powdercoat finish matches CVO engine components • Made in the U.S.A. NOTE: Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines. NOTE: Not recommended for Trike models including conversion models due to the lugging nature of these bikes. PART # DESCRIPTION EMIS* SUG. RETAIL 0901-02601 For 07-16 Touring models (except Twin Cooled models) 3 $8,099.95 1 Requires oil line kit PART #0711-0220 for installation. T124HC SERIES LONG BLOCK ENGINE • High Compression, 10.8:1 for the ultimate in street performance • No fuel system or ignition systems included • Special head machining fits stock length intake manifolds (S&S manifold size 410) • Stock style breathing system; compatible with stock and most performance air cleaners • Includes Super Stock™ heads, crankcases, TC3 oil pump and cam plate and easy start 640 gear drive cams • Redesigned cam cover • Specs: displacement 124”; bore 41/ 8”; stroke 45/ 8”; piston type forged flat top; compression Ratio 10.8:1 • Stone Gray powdercoat finish matches CVO granite engine components • Made in the U.S.A. NOTE: Cylinder heads on these engines are specially machined to compensate for the non-stock cylinder length. As a result, they are compatible with manifolds and throttle bodies with stock length intake runners. In addition, the breather vent bolt locations have been adjusted so they are in the stock location, so stock style air cleaner back plates will bolt up to these engines. NOTE: Not recommended for Trike models including conversion models due to the lugging nature of these bikes.
FEBRUARY 2024 THE DRAG SPECIALTIES 9 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION SUG. RETAIL FOR 07-23 BIG TWIN AND 06-17 DYNA TRANSMISSIONS (W/ MECHANICAL CLUTCH) 1107-0729 Wrinkle black $298.95 1107-0730 Gloss black 298.95 FUNCTION-FORMED™ CABLE TYPE TRANSMISSION SIDE COVERS • Function-Formed™ style milled from 6061-T6 aluminum • Minimalstic design with maximum exhaust pipe clearance • Compatible with OEM or aftermarket transmissions • 12-point stainless steel ARP bolts and gasket included • Convenient side transmission fill port • Utilizes the stock clutch cable, ball, and ramp • Available in wrinkle black or gloss black finish • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1106-0245 For 87-23 Touring, Softail and Dyna models with mechanical cable clutches $98.95 HEAVY-DUTY THROWOUT BEARING KIT • Developed to address the failures of the stock clutch throwout bearing • Features a 97% greater surface area and a 77% great static load capacity than the stock bearing • Includes throwout bearing ball ramp actuator with balls, snap rings and gaskets • Built for abusive and high performance applications • Made in the U.S.A. 1107-0730 1107-0729
FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 10 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS FIGURATI DESIGNS Jewelry-grade accessories for your American Big Twin! Company founder Kerry Cromer spent more than a decade as a jewelry wholesaler, his experience in that market shows in the level of quality and detail in every Figurati part. Made using 316L jewelry-grade stainless steel, each piece is laser engraved (not machined) and hand-detailed. True heirloom pieces, these parts are designed to add an incredible little piece of art to your motorcycle and last a lifetime. PART # DESCRIPTION SUG. RETAIL 0820-0246 Mirror polished w/ sugar skull design $47.95 PART # DESCRIPTION SUG. RETAIL 0820-0247 Black w/ sugar skull design $47.95 PART # SIZE SUG. RETAIL 4001-0254 Medium $144.99 PART # SIZE SUG. RETAIL 4001-0255 Large $149.99 RATCHET COVERS • Made with ClimaShield Plus - a 300 Denier, solution-dyed polyester fabric with a durable water-repellent top coat for maximum rain and UV protection • Pull cord allows you to loosen the cover to lift over your bike without scratching or doubling over on itself • Ratchet attachment on the drawstring keeps it cinched tight • Protects windshield with a layer of scratch-resistant lining bonded to the inside of the cover • All seams are taped with a textile based tape to ensure maximum strength and waterproofness • Updated heat shield material is used in places that may encounter warm pipes • Polyurethane and mildew-resistant undercoating • Reflective Moisture-Guard’s vent system is 195% larger to help prevent moisture build-up under the cover • Sewn-in hole for wheel lock to be passed through for added security • Includes convenient compression storage bag for easy transporting • For the DowCo cover application chart in the 2024 Drag Specialties FatBook for fitments PART # DESCRIPTION SUG. RETAIL FOR 17-23 M-EIGHT (2-HOLE) 0940-2162 Mirror polished w/ sugar skull $122.95 0940-2163 Black w/ sugar skull 122.95 PART # DESCRIPTION SUG. RETAIL FOR 99-17 TWIN CAM (5-HOLE) 0940-2164 Mirror polished w/ sugar skull $132.95 0940-2165 Black w/ sugar skull 132.95 TIMING COVERS • Take your timing cover to the next level • Made from 316L stainless steel 0940-2162 0940-2165 SEAT MOUNTING KNOBS • Knurled knob is easy to install or remove without tools • Features a raised motif to complete that custom look • Made from 316L stainless steel • SAE 1/4”-20 thread • Does not fit seats equipped with springloaded rear seat bracket FOR ALL TOURING AND TRIKE MODELS EQUIPPED WITH SAE 1/ 4”-20 THREAD SEAT MOUNT HARDWARE 0820-0246 0820-0247
FEBRUARY 2024 THE DRAG SPECIALTIES 11 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION SUG. RETAIL 1131-3889 For 14-18 Chief Classic/Vintage, 15-20 Roadmaster, 17-19 Chief Dark Horse/Classic, 17-20 Chieftain Elite, 18-20 Roadmaster Eliite, 20 Vintage, 21 Springfield Dark Horse/Vintage Dark Horse $16.95 STEEL CLUTCH PLATE • Meets or exceeds OEM specifications • Six plates required for a complete set • Sold each • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1131-3890 For 14-18 Chief Classic/Vintage, 14-20 Chieftain, 15-20 Roadmaster, 16-20 Chieftain Dark Horse/Springfield, 18-20 Roadmaster Elite, 20 Springfield Dark Horse, 21 Vintage Dark Horse $22.95 CLUTCH FRICTION PLATE • Features Carbonite friction material • Offers superior coefficient of friction • Provides higher temperature capacity • Decreases wear while increasing durability • Seven plates required for complete replacement • Sold each • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1131-3912 For 98-17 Big Twin (except models w/ slipper/assist clutch); repl. OEM #37871-98 $15.95 DIAPHRAGM CLUTCH SPRING • Heavy-duty replacement spring • Made in the U.S.A. DESCRIPTION STAINLESS STEEL PART # SUG. RETAIL BLACK VINYL PART # SUG. RETAIL FOR 14-21 CHIEF/CHIEFTAIN/ROADMASTER/SPRINGFIELD Std. 0652-2934 $111.32 0652-2936 $94.64 +6” 0652-2935 129.25 - - CLUTCH CABLES • Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible • Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with • Black vinyl cables are available with standard nylon-lined, PVC-coated casings • Made in the U.S.A. 0652-2936 0652-2934
FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 12 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS LOS ANGELES CHOPPERS Located in Huntington Beach, California, Los Angeles Choppers has been a leading manufacturer of metal fabricated goods for more than 25 years. Specializing in the design, tooling, and manufacturing of handlebars, machined aluminum risers, exhaust systems, and much more, they have had a long partnership with Drag Specialties in manufacturing some of the coolest handlebar designs available for your American V-Twin. CHROME PART # GLOSS BLACK PART # END RISE WIDTH SUG. RETAIL 0601-6265 0601-6266 10” 331/ 2” $349.95 0601-6267 0601-6268 12” 331/ 2” 349.95 0601-6269 0601-6270 14” 331/ 2” 349.95 0601-6271 0601-6272 16” 331/ 2” 349.95 11/ 2” KAGE FIGHTER T-BARS • High-strength steel tubing • Crossbar has over 35° of rotation to set your perfect angle • 31/ 2” on-center straight risers • Designed for internal wiring • Made in the U.S.A. NOTE: Accepts H-D OEM heated grips. 0601-6272 0601-6265 PART # DESCRIPTION SUG. RETAIL 0602-1466 1.5” straight riser set $106.95 0602-1470 3.5” straight riser set 133.95 0602-1467 4.5” straight riser set 160.95 PART # DESCRIPTION SUG. RETAIL 0602-1468 5.5” pull back riser set $274.95 0602-1465 Optional one-piece top clamp 88.95 CHUBBY® BILLET RISERS • Precision-machined from billet aluminum available in gloss black • Works with any standard 1” handlebar, Wild 1 Chubby Bars and most other bars • Uses stock top clamp, aftermarket top clamp, or Wild 1 custom billet top clamps (with offset mounting holes) • Made in the U.S.A. 0602-1470 0602-1467 0602-1468 0602-1466 0602-1465 PART # DESCRIPTION SUG. RETAIL FOR 08-20 FLHT/FLHR/FLTR/FLHX, H-D FL TRIKE, 16-20 SOFTAILS, 20 ELW, 16-17 FXDLS, 13-15 FXSBSE, 14-15 FLSTNSE, 11-12 FLSTSE 0630-3106 Spike, diamond, chrome anodized $85.95 0630-3109 Spike, diamond, black anodized 85.95 0630-3107 Contour, diamond, chrome anodized 74.95 0630-3112 Contour, diamond, black anodized 74.95 PART # DESCRIPTION SUG. RETAIL FOR 82-17 BIG TWIN (EXCEPT 08-17 DRESSERS, H-D FL TRIKE, 16-17 SOFTAILS, 16-17 FXDLS, 13-15 FXSBSE, 11-12 FLSTSE AND MODELS W/ AIR-ASSISTED FORKS) AND 82-22 XL MODELS (EXCEPT RH SPORTSTERS) 0630-3108 Spike, diamond, chrome $85.95 0630-3110 Spike, diamond, black anodized 85.95 0630-3105 Contour, diamond contour, chrome 74.95 0630-3111 Contour, diamond contour, black anodized 74.95 CUSTOM GRIPS • Feature an ergonomic seamless rubber grip technology • Billet aluminum end caps and collars • Available in chrome or black anodized finishes • Sold in pairs • Matching pegs sold separately • Made in the U.S.A. 0630-3109 0630-3105
FEBRUARY 2024 THE DRAG SPECIALTIES 13 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS CHROME PART # SUG. RETAIL BLACK PART # SUG. RETAIL DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK 0601-6297 $219.96 0601-6298 $220.96 Drag bar 0” 31” 9” 53/ 4 “ 0601-6293 230.96 0601-6292 229.96 Beach bar 243/ 4” 381/ 4” 14” 53/ 8 “ 0601-6295 232.96 0601-6294 231.96 Beach bar 24” 343/ 4” 14” 5” 0601-62991 252.96 - - Drag T-bar 73/ 4” 331/ 2” 9” 63/ 4” 0601-63001 233.96 - - Drag T-bar 91/ 2” 301/ 2” 9” 73/ 4” 1 Will not fit models with integrated lower riser clamp. 11/ 4” BURLY BARS • Bars feature tapered technology in the hand control area allowing the customer the freedom to use OEM or aftermarket controls (including hydraulic clutch controls) • 1” clamping area with 31/ 2” on-center knurling (except T-Bars), dimpled and drilled for internal wiring • Drag T-Bars have 31/ 2” on-center riser mounts • May require extended cable/brake line and wiring • Notched for Throttle-By-Wire applications • Accept heated grips • Made in the U.S.A. NOTE: Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. PART # DESCRIPTION END RISE WIDTH CENTER WIDTH PULLBACK SUG. RETAIL 0601-6291 Chrome 25/ 8” 351/ 4” 123/ 4” 143/ 4” $224.96 0601-6290 Gloss black 25/ 8” 351/ 4” 123/ 4” 143/ 4” 224.96 11/ 4” BIKINI BEACH BARS • Get retro with these ‘40s style handlebars • Constructed from high-quality steel tubing with a 31/ 2” on-center knurling • Highly polished, brilliantly chrome-plated or gloss black finish • 1” clamping area • Notched for Throttle-By-Wire applications • Works with hydraulic clutch • Accept heated grips • Made in the U.S.A. NOTE: Not for use with stock risers and handlebar clamp/gauge mount on 883C/1200C models. PART # DESCRIPTION SUG. RETAIL FOR 18-23 M-EIGHT SOFTAIL MODELS 1310-2325 12.2” L $479.95 PART # DESCRIPTION SUG. RETAIL FOR 18-23 M-EIGHT SOFTAIL MODELS (CONT) 1310-2333 13.5” L $494.96 M-EIGHT SOFTAIL SLAMMER SHOCKS • Crafted with a high-pressure nitrogen charged damper • Utilizes a hard chrome precision ground piston rod and features a steel monotube construction with an Internal Floating Piston (IFP) to provide incredible ride performance, even at increased speeds • Deflective disc valving • Preload adjustment via threaded preload adjuster with included preload spanner wrench 0601-6290 0601-6291 0601-6297 0601-6293 0601-6292 0601-6300 1310-2325
FEBRUARY 2024 THE DRAG SPECIALTIES dragspecialties.com 14 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION OEM # SUG. RETAIL 1710-4519 For 20-22 FLHR, 20-23 FLHTK/FLTRK (seven-lug mount) 41500157 $173.95 FRONT BRAKE ROTOR • Direct OEM replacement rotors • Give improved feel, performance and stopping power • Manufactured from high-quality 410 stainless steel • 100% laser-cut for precise fitment • High-quality blanchard-ground for precise flatness and an attractive finish • Compatible with all brake pad compounds and aftermarket calipers • The ideal combination with DP Brakes brake pads • Made in the U.S.A. PART # DESCRIPTION OEM # SUG. RETAIL HARLEY-DAVIDSON (SOLD IN PAIRS) 1721-3484 For 21-23 RH1250S 41300227 $41.95 1721-3486 For 04-13 XL 42831-04/04A 41.95 1721-34861 For 04-09 XL1200R, 05-13 XL883R 42831-04/04A 41.95 1721-34821 For 16-20 XG500/750/750A 41300169 45.95 1721-3484 For 20-23 ELW 41300072 41.95 1721-34841 For 21-23 RA1250/RA1250S 41300227 41.95 INDIAN (SOLD IN PAIRS) 1721-34841 For 20-23 Challenger Dark Horse/Limited/Elite - 41.95 1721-34841 For 22-23 Pursuit Dark Horse/Limited - 41.95 1721-3482 For 15-23 Scout/Sixty, 18-23 Scout Bobber/Sixty/Twenty, 22-23 Scout Rogue/Sixty - 45.95 1721-34841 For 19-23 FTR 1200/R/Rally/S/Sport - 41.95 1 Dual disc models require two sets. ROADPRO SINTERED METAL FRONT BRAKE PADS • For the new generation of high performance Sport, Touring and Custom motorcycles • Offers a combination of fade-free brake performance, great brake feel and thermal stability • Developed for sport riding and high loads from heavy motorcycles 1721-3484 1721-3486 PART # DESCRIPTION SUG. RETAIL 1610-0702 For 14-23 FLHT/FLHR/FLHX and FLTR models $269.95 DRIFTER REAR BRAKE LEVER • Designed for ergonomic efficiency • 1” range of length adjustment allows you to run up to 1” longer than stock • Machined from billet aluminum and available in Black Ops finish • Black Ops features a gloss black finish over a contrasting texture black finish for outstanding durability and looks • Stylish match to Performance Machine Drifter Floorboards and Drifter Shift levers (sold separately) • Mounts to the factory location • Includes brake lever toe peg • Sold each PART # DESCRIPTION SUG. RETAIL 1602-1557 For 84-23 FLHR/FLHT/FLHX/FLTR and 00-17 Softail models $169.95 DRIFTER SHIFT LEVER • Designed for ergonomic efficiency • 1” range of length adjustment allows you to run up to 1” longer than stock • Machined from billet aluminum and available in Black Ops finish • Black Ops features a gloss black finish over a contrasting texture black finish for outstanding durability and looks • Stylish match to Performance Machine Drifter Floorboards and Drifter Brake levers • Mounts to the factory location • Includes shift peg • Sold each
FEBRUARY 2024 THE DRAG SPECIALTIES 15 dragspecialties.com DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS PART # DESCRIPTION SUG. RETAIL 2210-0662 For 14-23 FLHT/FLHX/FLTR models $289.95 2210-0661 For 14-23 FLHR, 11-17 FXST, 12-23 FXD, 14-22 XL (except RH Sportster) models 269.95 2210-0660 For 04-13 FLHR, 04-10 FXST, 04-11 FXD, 04-13 XL models 269.96 D2 MULTI-FUNCTION METER • High-quality plug & play meter equipped with 8-color changeable LCD display • Designed to mount below cutout top handlebar clamp for a sleek look (handlebar riser kit w/ gauge cutout or gauge relocation kit may be required depending on application; see pages 1240 and 1582 of the 2023 Drag Specialties FatBook respectively) • Features a tachometer/speedometer combination with a programmable shift light and includes gear indicator • Features vital reads such as engine temperature, battery voltage, tire pressure and a complete system of indicator lights to monitor vital signs on bike • Plugs directly into the stock harness and works directly with CANBUS system • Display range: 0-124 mph • Effective temperature range: -4°F-185°F (-20°C-85°C) • 12VDC battery voltage • Measures 37/ 16” L x 11/ 16” W x 25/ 8” H NOTE: XL models may require purchase of separate fuel level sensor kit (OEM PART #6120008) for fuel meter to function properly. PART # DESCRIPTION SUG. RETAIL FOR 14-23 FLT/FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKE 1401-0979 For 16”-19” wheels, w/ satin adapters $349.95 1401-0980 For 21” wheels, w/ black adapters 379.95 FOR 18-23 SOFTAIL MODELS WITH STANDARD FORKS 1401-0978 For 16”-19” wheels, w/ satin adapters 349.95 THICKY FRONT FENDERS • Redesigned, now features a lengthened front and rear, squared ends and thicker sidewalls • Fenders are built from premium one-piece 14-gauge steel construction, no welds • Added surface area allows for more elaborate custom paint designs • E-coated finish • Pre-drilled for installation • Available with satin or black fender spacers/adapters • Made in the U.S.A. NOTE: Softail fenders do not fit models with inverted forks. 1401-0979 PART # DESCRIPTION SUG. RETAIL 2202-0303 For 22-23 FXLRS/FXLRST/FXRST $258.95 SLIMLINE CUSTOM DASH KIT • Custom, low-profile look • 3-D molded, hand laid composite material • Can accept console badges • Made in the U.S.A. NOTE: This kit may fit other M-Eight Softail applications with 5 gallon tanks with modification. Does not fit M-Eight Softail applications with 3.8 gallon tanks. 2210-0660 1401-0980
FEBRUARY 2024 THE DRAG SPECIALTIES 16 DISCLAIMER: PRODUCTS WITH EMIS CODE 1 ARE EMISSION COMPLIANT IN ALL STATES, INCLUDING CALIFORNIA. PRODUCTS WITH EMIS CODES 2 ARE EMISSION COMPLIANT IN ALL STATES EXCEPT CALIFORNIA. PRODUCTS WITH EMIS CODE 3 ARE “COMPETITION USE” ONLY,AND NOT LEGAL IN ANY STATE FOR STREET USE ON ANY POLLUTION-CONTROLLED VEHICLES. PRODUCTS WITH EMIS CODE 4 HAVE NO U.S.TERRITORY RESTRICTIONS 9901-3431 PART # DESCRIPTION SUG. RETAIL FOR 14-23 FLHT/FLHR/FLHX/ FLTRX/FLTRU/FLTRK AND H-D FL TRIKE MODELS 0403-0181 Blue anodized $279.95 0403-0182 Gold anodized 279.95 0403-0183 Red anodized 279.95 METHOD PERFORMANCE BAGGER FORK GUARDS • Lightweight Performance Bagger fork guards inspired from the racetrack • Replace factory fork boots while still protecting inner fork tubes and seals • Universal design works with factory and aftermarket front ends (direct bolt-on installation) • CNC-machined from 6061 billet aluminum • Includesa set of fork dust seals • Sold in pairs PART # DESCRIPTION SUG. RETAIL FOR 14-23 FLHT/FLHR/FLTRX//FLTRK/FLHX AND H-D FL TRIKE 0411-0257 Cross Cut $466.95 0411-0259 Platinum Cut 466.95 FOR 80-13 FLT/FLHT/FLHR/FLTR/FLHX/H-D FL TRIKE AND 86-17 FLST MODELS 0411-0258 Cross Cut 466.95 FAT TIRE FORK SLIDER COVERS • A new spin on the original Eddie Trotta fork slider covers for wide tire builds • CNC-machined from 6061-T6 aluminum with a chrome finish • Sold in pairs • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 1621-1161 For 80-23 FLT/FLHT/FLHX/FLHR/FLTR/FLTRX/FLTRU/ FLTRK, 09-13 H-D FL Trike, 86-17 FLST and 12-16 FLD $574.95 3/ 4 CROSSCUT DRIVER FLOORBOARDS • CNC-machined from 6061 billet aluminum with a chrome finish • Feature Reverse Cut design with a raised, Diamond Cut center for increased traction • Same design as the large floorboards, but in a 3/ 4 size to resemble stock floorboards • Measure 15.13” L x 4.75” W • Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 0502-0608 For 18-23 FLHC/S, FLFB/S, 18-21 FLSL, 18-20 FLDE $24.95 SHIFT PEG SPACER • Moves the shifter assembly and bracket in-board, giving even more room for your foot on the floorboard - without it, the shifter stays in the same position, relative to the stock floorboard location • To be used with floorboard extensions (PART #1620-2431), sold separately 0411-0259 0411-0257 0403-0182 0403-0181 0403-0183
www.dragspecialties.comRkJQdWJsaXNoZXIy OTcxOTk3